Warranty: | Three Years or 3000 Running Hours |
---|---|
Output Type: | AC Three Phase |
Gas Source: | Gas |
Power: | >200kW |
Rated Power (Kw/kVA): | 250/312.5 |
Rated Voltage: | 220/380 |
Customization: |
---|
Suppliers with verified business licenses
250KW BIOGAS CHP | ||
Genset Model | YDNC-250CHP | |
Rated electrical power (kW) | 250 | |
Rated thermal power(kW) | 384 | |
Rated overall efficiency(%) | 86 | |
Rated Current (A) | 450 | |
Dimension (mm) | 5584*1540*2680 | |
Gross Weight (kg) | 6800 | |
Biogas Engine | Brand | YDN |
Model | K19N | |
Configuration | Four-stroke,Water-cooling,Direct Injection,6L-type | |
Rated Power (kW/kVA) | 288/360(CH4 no less than 55%) | |
Rated Speed (rpm) | 1500 | |
Cylinder No. | 6.L | |
Bore*Stroke (mm) | 159×159 | |
Oil Consumption (g/kw.h) | ≤1 | |
Gas Consumption (Nm3/h) | 35.7@100% load | |
Starting method | 24V DC | |
Gas control system | ECU | WOODWARD®(USA Brand) |
E-Throttle | WOODWARD®(USA Brand) | |
MIXER | WOODWARD®(USA Brand) | |
Regulator | MADAS®(Italian Brand) | |
Spark plug | TORCH®(China Brand) | |
Water temperature | WOODWARD®(USA Brand) | |
Alternator | Brand | FARRAND |
Model | FLD-250 | |
Rated Power (kW/kVA) | 250/312.5 | |
Efficiency | 92.50% | |
Voltage Regulation | <=±1 | |
Voltage Regulation | Brushles, Self Excitation | |
Insulation Class | H | |
Control Modules | Brand | DSE |
Model | 8610 | |
Working Voltage | DC8.0V to DC35.0V, continuous | |
Overall Dimensions (mm) | 197*152*47 | |
Panel Cutout (mm) | 186*141 | |
Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% | |
Weight | 0.56kg | |
CHP | Rated supply and return water | 16.4/5.5m3/h |
Rated water return water resistance | 50Kpa | |
Rated thermal efficiency | 52% | |
Rated output water temperature | 85ºC | |
Supply and return water temperature difference | 20ºC/60ºC | |
Flue gas flow | 1200m³/h | |
Components and accessories | Biogas engine,CHP, 100% copper AC alternator, common base, digital control panel, igination system, gas control system, gas pressure regulator, air filter assembly, muffler, batter, tool kit and spare parts | |
Requirements for Biogas | 1.Methane should be at least 55% 2.The biogas temperature should be between 0-60 ºC 3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3. 4. Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined. 5. Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary. 6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3 |
Suppliers with verified business licenses