Xi'an, Shaanxi, China
Member Since: 2018
Business Type: Trading Company
|Type||201 304 Color prepainted Mirror Finished Stainless Steel Sheet / plate|
|Thickness||0.3 mm - 3.0 mm|
|Size||1000*2000mm, 1219*2438mm, 1219*3048mm, |
customized Max. width 1500mm
|SS Grade||304,316, 201,430 etc.|
|Finish||Vibration + PVD Color Coated|
|Available finishes||No.4, Hairline, Mirror, Etched, PVD Color, Embossed, Vibration, Sandblast, |
Combination, lamination etc.
|Available Color||Gold, Rose gold, Champagne gold, Copper, Bronze, Black, |
Blue, Purple, Green etc.
|Packing way||PVC+ waterproof paper + strong sea-worthy wooden package|
Mirror finish is created by mechanically treating the surface with a series of progressively finer abrasives.
Alternatively a special rolling procedure is used which can simulate the appearance of mechanical abrasion.
For this stage, it is essential to remove deep scratches as any surface defects will be very noticeable on the
finished product. The final process involves buffing the surface for 5-10 minutes to create a mirror-like, highly
PVD is the abbreviation of Physical Vapor Deposition. It is a process carried out in high vacuum at
temperatures between 150 and 500 .PVD stands for Physical Vapor Deposition, which refers to under the
condition of vacuum, use Physical method to make material preparation technology of thin film deposited on
the plated , A range of colors are available, including gold, black, bronze, blue and so on.
Stainless steel embossed sheet, also known as "3D stainless steel sheet", is a new concept sheet, which has
strong three-dimensional effect. It is processed by embossing stainless steel sheets with machinery so that
concave-convex patterns are made (dozens of patterns available).
Metal is metal with a unidirectional satin finish. It is produced by polishing the metal with a 120-180 grit belt or
wheel then softening with an 80-120 grit greaseless compound or a medium non-woven abrasive belt or pad.
Brushing gives metal a distinctive look, as it retains some but not all of its metallic luster and is given a pattern
of very fine lines parallel to the brushing direction.
The coloring of stainless steel can be achieved by chemical surface treatment which actually modifies the
surface oxide film on the metal. The colored finish is attractive but susceptible to finger-marks, which results in
a color change and is not hard-wearing, and this should be considered when deciding on the use. The process
uses acidic solution which, due to the variances in composition of the stainless and the process variables, can
be guaranteed to be the same every time.
A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a
blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed,
as is some sort of collector to gather up excess dust.