2 Dogs in 1 Rechargeable and Waterproof 300 Meters Remote Control Electric Shock Anti-Bark Pet Dog Cat Training Collar with LCD Display

Petrainer rechargeable and waterproof training collar has been proven safe, comfortable, and effective for all pets over 8 pounds. This system assists you in controlling your pet without a leash in range up to 300m. At the push of a button, the remote transmitter sends a signal, activating the receiver collar. Using the remote trainer consistently and correctly, much misbehavior that your pet exhibits can be corrected or any basic obedience commands can be taught.
The remote trainer has a range up to 300m. Depending on the way you hold the remote transmitter, the range may vary. Hold the remote transmitter in a horizontal position away from your body to achieve optimum range. Terrain, weather, vegetation, transmission from other radio devices, and other factors will affect the range of your remote trainer.

Description:
1. Antenna: transmit the signal to Receiver Collar
2. LED lamp: the lamp will light when you press the button of LED light
3. LED Indicator lamp: the light will flash when the transmitter is working. The lamp will light when it is being charged.
4. LCD Screen:
Static mode: under this mode, press "Y" button, Receiver will shock; press up/down button, can adjust the level of Static shock from 0 to 100.
Vibration mode: under this mode, press "Y" button, Receiver will vibrate; press up/down button, an adjust Vibration level from 0 to 100.
Beep mode: under this mode, press "Y" button, Receiver collar can get beep sound.
Light mode: under this mode, press "Y" button, the green LED light in the Receiver will flash every one second, it is convenient to let you know where your pet is.
Channel 1: select to encode between transmitter and one of receiver collar
Channel 2: select to encode between transmitter and 2nd of receiver collar
5. Up/down button: intensity level button for Vibration and Static Shock
6. LED lamp button: when pressing the LED light button, the lED lamp in the Transmitter will light
7. Channel button: press the button, can select to encode between transmitter and one of receiver collar, or another one
8. Launch button: after you finish mode select, press this button for confirmation.
9. Mode button: include 4 modes: Static Mode, Vibration Mode, Beep Mode and LED lamp mode
10. Charging hole: charge for Remote Controller
11. Contact points: deliver the safe static correction
12. Rest hole: turn on/off the receiver
13. DV-5V hole: charge for receiver

Features:
With compact portable design
Easy to use, ergonomic transmitter.
Waterproof for training in bad weather and keep the inside of collar against wet.
Rechargeable collar with USB Charge cable
Rheostat's dial that allows to gradually increasing the stimulus intensity within 0-100 levels
4 training modes: static shock/vibration/beep/light
Two dog modes allow the trainer to control two different dogs from one transmitter.
Featured power saving design with automatic standby and memory function
No external antenna on the collar receiver
Reduced receiver/collar is ideal for small/medium size dogs
The liquid crystal digital display let the operation become simple

How to use:
1. Charge the remote transmitter/receiver:
1) Connect the charger's connector to the charging jack (DC-5V hole)
2)Connect usb cable for charging
3) The red light on the transmitter will be lighted
4) Charge the transmitter/receiver at least 6 hours for the first charge
5) After fully charged, the red LED lamp will be turned off automatically (Important note: Low battery indicator: the symbol will show on the LCD screen)
2. Connect transmitter and receiver:
1) Turn on the transmitter by pressing any button on the transmitter
2) Press "1/2" button to choose channel for connection, choose channel 1 for the first receiver
3) Lift the rubber cover of the Reset part on the receiver. Press the Reset button inside of the receiver with a pen or paper clip, and the green LED light will turn on
4) After a Beep came from the receiver, press the "Y" button on the transmitter within 10 seconds
5) The collar receiver will beep if successfully connected
6) Press "1/2"button to encode, choose to channel 2 for second collar by the same procedure

Important notice:
1. The transmitter will go into Standby Mode after 20 seconds if there is no operation and turn off after 20 minutes
The receiver will go into Standby Mode if unused for 4 minutes. Any movement will activate the receiver.
2. "1/2" button to choose channel for connection. In channel 1, can only train the first receiver, in channel 2 train the second receiver
3. In working mode, if you want to reconnect the receiver, simply use a pen or paper clip, press the reset button, there is a beep sound that indicates that it's ready to encode
4. The receiver is designed to be waterproof. The rubber cover has to be put in the right position

What is included:
1 x receiver Collar 
1 x Remote Transmitter
1 x Test light
1 x Adjustable collar strap
1 x Charger (EU ,UK,US,AU ,)
2 x long electric electrodes (about 15mm)
2 x short electric electrodes (about 10mm)
1 x User manual