Business Type: Manufacturer/Factory
Foshan, Guangdong, China
1.The chassis is thick, resistant to falling, shockproof and not easily deformed.
2.MOS tubes, ICs, and triodes are all new imported raw materials.
3.Toroidal transformer, small no-load current, low loss, high efficiency
4.The process is good, the wiring is complete, the circuit board wire head is not easy to loose, and the failure rate is reduced.
5.Power board brushed three anti-paint, moisture-proof, dust-proof, anti-static, improve work efficiency
6.Design life is 10 years
|DC inpute rang||42-60VDC (48V)|
|AC Mains input range||140-275VAC (220/230/240VAC) ±4%|
|AC input frequency||50Hz / 60Hz|
|Charging efficiency||90%-95%, Peak on 97%|
|Output voltage||(DC battery mode) 220/230/240VAC ±2%|
|Output wave form||Pure sine wave|
|Charging voltage||54.4 -56.8VDC(48V)|
|Charging current||0-35A, charging current adjustable|
|Over charge protection||Battery voltage>=64VDC (48V), stop charging after 60s alarm|
Since the establishment of our inverter factory, we have been purchasing transformers and capacitors from the same supplier.
MOS tube adopts an imported IR brand.
ICT test, pinhole alignment PCB board, check all lines, reduce the failure rate.
Wall-mounted inverter board production uses automated machine plug-ins. Improve efficiency, reduce loss, and enhance stability
|Factory Inspection System|
Our inverter has passed 100 times of ultimate power-off test. According to statistics, 99% of the tested inverter can work very stable.