Business Type: Manufacturer/Factory & Trading Company
Dongguan, Guangdong, China
Open frame touch monitor paramters
15"SXGA Color TFT-LCD
V-GA and D-VI
Allow on-screen adjustments of Brightness, Contrast Ratio, Auto-adjust, Phase, Clock, H/V Location, Languages, Function, Reset
Type: External brick
1)VE-SA 75mm and 100mm
2)Mount bracket, horizontal or vertical
3 years for IR touch screen; 1 year for LCD
Nominal Input Voltage VDD
Viewing angle (v/h)
Cjtouch Infrared(IR) Dual touch screen
Touch Life Cycle
Touch Response time
Touch System Interface
USB Cable 120cm*1 Pcs,
VGA Cable 180cm*1 Pcs,
Power Cord with Switching Adapter *1 Pcs,
Solutions to Common Problems
|The monitor does not respond after you turn on the system||1)Check that the monitor's Power Switch is on.|
2)Turn off the power and check the monitor's power cord and signal cable for proper connection.
|Characters on the screen are dim||Refer to the About Touch monitor Adjustments section to adjust the brightness.|
|The screen is blank||1)During operation, the monitor screen may automatically turn off as a result of the Power Saving feature. Press any key to see if the screen reappears.|
2) Refer to the About Touch monitor Adjustments section to adjust the brightness.
|Screen flashes when initialized||Turn the monitor off then turn it on again.|
|"Out of Range" display||Check to see if the resolution of your computer is higher than that of the LCD display.Reconfigure the resolution of your computer to make it less than or equal to 1920×1080. See Appendix A for more information on resolution.|
|Touch doesn't work||Make sure the touch cable is securely attached at both ends.|
Touch Monitor Production
1.Read these safety instructions carefully.
2.Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
3.For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
4.Keep this equipment away from humidity.
5.Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.
6.The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
7.Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
8.Position the power cord so that people cannot step on it . Do not place anything over the power cord.
9.All cautions and warnings on the equipment should be noted.
10.If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.
11.Never pour any liquid into an opening. This may cause fire or electrical shock.
12.Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
13.If one of the following situations arises, get the equipment checked by service personnel: A)The power cord or plug is damaged. B)Liquid has penetrated into the equipment. C)The equipment has been exposed to moisture. D)The equipment does not work well, or you cannot get it to work according to the user's Manuel. E)The equipment has been dropped and damaged. F)The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -10ºC OR ABOVE 50ºC. THIS MAY DAMAGE THE EQUIPMENT.
What We Offer:
Through our consistent and high quality performance, CJTouch has got ISO 9001 certified and has earned CE, UL, FCC, RoHS and other international certifications.
Single & Multi-touch screens (custom sizes available)
Single & Multi-touch monitors (custom sizes and functions available)
Gaming / casino / ATM Kiosk / Hotle / KTV / TV
Industrial / Public inquiry / Coffee / Bar
Entertainment / Hospital / Restaruant / Advertising
Transport and Ticketing / Banking
Hospitality / Meeting / Teaching
Customizsed SolutionsBusiness Institutions: Market ,Store ,Hotel , Restaurant