Ningbo, Zhejiang, China
Member Since: 2010
Business Type: Manufacturer/Factory
The Low pressure pulse valve will stop working by the differential pressure between the both sides of the diaphragm. The polited-head of valve open the balancing holes with the time of pulse width(0.15~0.3s). The airflow in the high pressure area of diaphragm will be released so that the diaphragm will be holded up and the valve starts blowing.
Garlock membrane is used.
If need more details, please come back to me!
10inch low pressure pulse Valve Introduction
With the standard of dust emission from the power industry being further enhanced, high-efficiency baghouse filter has been widely promoted and used in power plant industry.
Presently, the long-arm rotating baghouse is polularly used in power industry, the feature of which is suitable for the dust wind with high air volume, small wokload of maintenance, high blow volume, low pressure and energy saving, etc. The heart part system of pulse valve is usually imported from abroad the 8" Pulse Valve while the most of Pulse Valve produced domestically is at most 3" which can not meet the requirement of high blow jetting volume. To satisfy the high speed development of APC requirement, we have developed 8", 10", 12", 14" and 16" low pressure pulse valve. After the experimental test, all the performance have reached the foreign standard. Welcome the users to select.
The low pressure large-orifice pulse valve stop working by the differential pressure between the both sides of diaphragm. The pilot head of Pulse Valve open the balancing holes with time of pulse duration ( 0.15-0.3s). The airflow in the high pressure area of diaphragm will be released so that the diaphragm will be holded up and the Pulse Valve start cleaning.
Installation Size for reference
Assembly of Pulse Valve