The GS Single phase high speed centrifugal blower is specially for waste water treatment plant aeration.
Single phase high speed centrifugal blower which has more than 80% efficiency can replace. Roots blower and multi-phase centrifugal blower. Compared with Roots blower, it is a revolutionary improvement.
Discharge differential pressure
380/400/415/440V/6KV/10KV, 3PHASES, 50/60HZ
Standard: Siemens Beide or Wannan motor
Siemens and ABB motor for your option
a. For Cement industry: cement conveying blower,ventilating, etc.
b. For Sewage Treatment System: aeration blower, back-washing blower, etc.
c. For Pneumatic Conveying: to conveying powder materials, such as flour, cement, sand, grain, etc.
d. For Dust Collecting, dust cleaning, ventilation in some factory, hospital, buildings, etc.
e. For Electric Power Plant: gas conveying, oxygen increasing, ventilating, dust cleaning, etc.
1. Inlet guide vane device
- position--in front of blower impeller
- Function--Not only for adjusting the blower capacity within 45% - 100%, but also for ensuring the blower to reach the highest efficiency within adjusting scope, especially when operation parameters deviating from the designed data (low temperature or low pressure).
- Adjusting--automatic or manual operation by clicking the touch screen on blower control box. Under the automatic operation, the inlet guide vane is adjusted by electric operator at a set ratio after it receives 4-20mA DC signal, while under manual operation or maintenance condition, the vane is adjusted manually.
2. Mature volute design
Reliable pneumatic performance, high efficiency, multi-variable efficiency of 85 %.
3. Impeller of high efficiency
- The curve for the impeller is selected recurring to simulate working condition on computer, and better fitting for the actual flowage of gas.
- Made of aerial aluminum alloy or stainless steel, open path backward bent (smallest dip angle of 6 degree), surface fine machined.
4. Step-up gear box structure and bearing of high reliability
- The gear box is of horizontal -split structure, volute casing connected to lower casing and separated from upper casing,through which shorten the time required for unloading box cover.
High-speed shaft adopts hard thrust disc technology, high-efficiency and low mechanical loss confirmed by line contact.
- Ellipse ( dislocation ) bearing adopted for big gear,tilting-pad bearing for high-speed gear.
- The shaft of blower and gear is made of heat-treated forging steel and proper grinded. Every horizontal critical speed is within the scope of±15% than the normal speed, and torsion resonance speed is within the scope of±10% than the running speed, all rotating parts is dynamic balanced.
- The step-up gear is of Parallel Axis helical type with integral small gear and rotating shaft.
Made of surface-quenching forging alloy steel and precisely grinded, the gear's service index is 1.8 at least.
5. High-precision gear driving
- Gear of the highest quality grade adopted
- Gear precision grade is stabilized at ISO1328 5~4
- The highest precision grade can reach 3.
- Precision grade equal to the standard AGMA or DIN
6. Connection between impeller and high-speed shaft
- Adopt the connection type of straight end-face key (pin) and triangular shaft
- The highest power can be transferred reaches 3,000 kW.
- Convenient in assembling and disassembling without damage to parts
7. Seals of high performance
- The material of seals is alloy of soft texture. (spiral seal adopted)
- Reliable function, long service life
- No leakage problem
- Low cost required for maintenance, convenient in replacement
- Energy consumption lowered by no friction
Operation resultThe most Striking feature of GS blower is energy efficiency.
From Mar. 1, 2009, we have started trial running of one blower (Model: GS160) in Qiting Sewage Treatment Plant.
Comparing with two roots blowers each of capacity 80m3/min and motor power 132kW operated before, every month 30000 RMB has been saved after use of GS Single-stage High-speed Centrifugal Blower, though it is not at full load operation.
Safer and More Convenient
Controlled full-automatically with every breakdown recorded, more convenient for operator
Assembling drawing of blower package
Standard supply of scope
1. Blower Main body
2. Inlet guide vane
3. Inlet silencer
4. Stainless steel flexible joint
5. High speed gear box
7. Discharge valve
8. Check valve
9. Base frame
10. Lubricant system
11. PLC control box
(1) Three lobes roots blower
(2) ATB Turbo Blower
(3) Bio-gas Roots Blower
(4) Three-lobe Vacuum Pump
(5) HC Rotary Blower
(6) Air-foil-bearing Centrifugal Blower
(7) Single stage Centrifugal Blower
(8) Multistage Centrifugal Blower
(9) Side channel Blower
(10) Submersible Sewage Pump