| Type: | WiFi Bridge |
|---|---|
| Work Mode: | AP+STA |
| WiFi Antenna Type: | Built-in |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
CPE-890DH is an high power industrial 5G outdoor CPE with 10KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE's operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
| Hardware: | |||||
| Chipset | Qualcomm QCA9563+QCA9886+QCA8334 | ||||
| Standard | 802.11ac/a, MIMO technology | ||||
| Memory | 128MB DDR2 RAM | ||||
| Flash | 16MB | ||||
| Interface | 1 * 10/100/1000Mbps RJ45 WAN Port | ||||
| 1 * 10/100/1000Mbps RJ45 LAN Port | |||||
| 1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection | |||||
| 1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection | |||||
| Antenna | Build in 18dBi MIMO Panel Antenna | ||||
| Power consumption | 24V PoE, <15W | ||||
| ESD | ±6KV | ||||
| Surge | ±2KV | ||||
| Water Proof Level | IP65 | ||||
| Size | 315mm * 145 mm * 80mm | ||||
| RF Data | |||||
Frequency |
5GHz: 802.11a/ac | ||||
| 5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz | |||||
| Throughput | 900Mbps | ||||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||||
| DSSS = DBPSK, DQPSK, CCK | |||||
| Receive Sensitivity& RF Power | |||||
| RF Power | 802.11a | 54M | 23±2dBm | 6M | 26±2dBm |
| 802.11n HT20 | MCS7 | 22±2dBm | MCS0 | 25±2dBm | |
| 802.11n HT40 | MCS7 | 21±2dBm | MCS0 | 24±2dBm | |
| 802.11ac HT80 | MCS9 | 20±2dBm | MCS0 | 23±2dBm | |
| Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 . | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 . | -86dBm | |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 . | -85dBm | |
| EVM | 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB | ||||
| Firmware Features: | |||||
| Operation mode | Wireless AP, Client | ||||
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | ||||
| SSID | Multiple SSID up to 4 | ||||
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
||||
| Protocols | IPv4 | ||||
| Others: | |||||
| Package Contents | 900Mbps Dual Band wireless access point Ethernet Cable 24V PoE adapter Quick Installation Guide Setting Accessory |
||||
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | ||||
| Environment | Operating Temperature: -30~55 ºC Storage Temperature: -40~70 ºC Humidity: 5%~95% non-condensing |
||||
| Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}