Industrial Lighting UFO High Bay Light IP65 Waterproof 140lm/W Parameter Model LM-UHB200 Power 200W Luminous 28000LM Input Voltage AC100-277V CRI Ra>80 CCT 3000K-3500K/4000K-4500K/5500K-6500K Dimmable Solution PWM/ 0/1-10V /RESISTORS Installation Suspended Light Efficacy 120LM/W-140LM/W IP,IK Rating IP65,IK07 Warranty 5 year limited Dimension ¢400*170 Weight 5.6KG Features 1.IP65 both for indoor and wet location 2.Various beam angleoptions:60degree,90degree,120degree 3.3030 led chip,140lm/w max 4.Intelligent microwave sensor,auto ON or OFF LED high bay 5.From 100w to 200w solution for 6 to 20 meters 6.Meamwell driver,1-10V and PWM or resistance dimmable available 7.5 years warranty Installation instructions 1. Fixtures must be operated by a licensed electrician. 2. Check if fixtures are sloid and in good condition once packaging is open. 3. Do not let fixture fall down from ceiling system or clash to hard stuff. 4. Make sure that the cable of fixture is long enough to connect. Do not knot or pull the cable strongly while wiring. 5. Do connect input end of fixture to output end of LED driver. 6. Wiring must be firm and tight with insulation protection well. Be aware of electricity shock. 7. Keep fixture and LED driver away from water or liquid, free from electric leakage and electricity shock. 8. Must use LED driver approved by Lumin, otherwise, fixtures may not work normally, and may be damaged, may cause unexpected incidents. Lumin will not bear any responsibilities due to such deeds. Application Wide beam angle with good lighting distribution is quite suitable for industrial lighting,warehouse,factory,gym,etc. Do's & Don't's 1. It's only used indoors. 2. Check if fixtures are in good condition before using. 3. Keep packing material away from children, and prevent children from playing. 4. Keep necessary accessories away from swallowing by Children. 5. Do not stare at light source directly for a long time. 6. Please don't cover anything on the fixture. 7. Do not disassemble or repair fixtures by unlicensed people. Otherwise, Lumin has the right to refuse replacement or maintenance. 8. Must switch off electricity before cleaning. Do clean fixtures with dry soft cloth, free from chemical or corrosive matters. Trouble Shooting Problem Possible Cause Solutions Can not light up Wrong or loose wiring connection Double check wiring methods, and connect in the right way. Do cut off electricity before wiring Using wrong LED driver Replace it with adaptive LED driver LEDs damaged or LED driver damaged Repair or replace it with new light source or LED driver Blinking light Fixtures do not match LED driver, or LED driver fails Repair or replace it with new driver. Environmentally friendly (1) No glare, mercury, ultraviolet, infrared or other hazardous substances (2) Operating Temperature: -25ºC to 55ºC (3) Operating Humidity: 10% to 80% (4) Storage Temperature: -40 to +85 ºC (5) Storage Humidity: 10% to 80% Benifits 1.Replacing CFL tube fixture of 2*2 (62x62cm), saving 70% energy 2.The joint gap is tiny and there is no light link. 3.The light distribution is uniform,without bright border. 4.The back plate is lighter weight and better heat dissipation. 5.LED driver adopt double screen input and output line,with CE certification,with famous LED driver. About Lumin Based in Shenzhen, Lumin Lighting is a fast-growing semiconductor lighting manufacturer and supplier in China. Lumin Lighting was founed on November 17, 2008. Since its founding, Lumin Lighting is committed to developing, ma