| Product Type: | Strip |
|---|---|
| Material: | Tungsten Carbide |
| Products Name: | Tungsten Carbide Wear Parts Carbide Plate |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Tungsten Carbide Jaw Gripper Process Introduction:
1. High purity of raw material, less impurity content, more stable physical properties of plate.
2. Spray drying technology is adopted to protect the material with high purity nitrogen under the condition of full sealing, which effectively reduces the possibility of increasing oxygen in the preparation process of the mixture, has better purity, and the material is not easy to dirty.
3. Uniform density: 300Mpa isostatic press is used to suppress, which effectively avoids the generation of pressing defects and makes the blank density more uniform.
4. The plate has good density, good strength and hardness indexes: ship low-pressure sintering technology is adopted to effectively reduce the pores in the plate and stabilize the quality.
Properties Of Grade
| a. With one end round | b.Round at two ends | c. Straight at two ends |
| 30*6*6 | 25*5*3 | 20.8*9*6.3 |
| 28*8*7 | 35*6*4 | 22*10*6.15 |
| 15*6.8*7 | 28.5*6*5.5 | 49*30*10 |
| 29.8*6.8*7 | 30*7*7 5 | 69.5*6.3 |
|
Grade
|
Density (g/cm³) |
Hardness (HRA) |
T.R.S (Mpa) |
Application Recommended
|
|
YG4C
|
15.00
|
89.5
|
1800
|
Mainly used as small buttons for percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
|
YG6
|
15.8
|
89.5
|
1700
|
Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
|
YG8
|
14.7
|
88.5
|
2300
|
Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
|
YG13C
|
14.3
|
86.0
|
2500
|
Mainly used as the inserts and buttons of tricone bits rotary-percussive bits and heavy rock drill bits to cut medium-hard and hard formations. |
|
YG15
|
14.0
|
86.5
|
2500
|
It is stronger, and is mainly used as the inserts and buttons of rotary-percussive bits, heavy rock drill bits to cut hard and very hard formations. |
1. 100% virgin raw materials.
2. Various kinds of grades are availalbe based on customer's application.
3. we have professional advanced production line and inspeciton equipments to ensure high quality products.
4. Precision Ground and high polishing process
5. High wear resistance,high hardness and impact toughness
6. Advanced technology , precise grinding.
Generally, we pack our goods in neutral white boxes and brown cartons, we also can pack the goods based on your requirements,like your own labels.
Q1: What is the Warranty for our products ?
---We own high precision grading machine to control geometry dimensions and apply ultra fine grain size substrate coated with high performance coatings to guarantee the lifetime of our products, which can satisfy every working condition. If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.
Contact Us
Zhuzhou Evergreen hardmetal Tools Co., Ltd.
Your Inquiry Will be much appreciated and Replied the Soonest.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}