Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
---|---|
Plastic Properties After Heated: | Thermoplastic Plastics |
Plastic Forming Method: | Extrusion |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Reference Standard TUV 2PFG 1169 Typical Physical And Mechanical Properties Are As Follows: | ||||||||||||||||||||||||||||
Item | Unit | Test Method | Typical | |||||||||||||||||||||||||
Density | g/cm3 | GB/T1033.1 | 1.48 | |||||||||||||||||||||||||
Tensile Strength | Mpa | GB/T 1040.3-2006 | 11.0 | |||||||||||||||||||||||||
Elongation At Break | % | GB/T 1040.3-2006 | 180 | |||||||||||||||||||||||||
Low Temperature Impact Embrittlement Temperature (-40 ºC) | … | GB/T 5470-2008 | Pass | |||||||||||||||||||||||||
Volume Resistivity (20 ºC) | Ω·m | GB/T 1410-2006 | 1.8×1012 | |||||||||||||||||||||||||
Smoke Density 25kW/m2 | Without Flames | … | GB/T 8323.2-2008 | 245 | ||||||||||||||||||||||||
With Flames | … | GB/T 8323.2-2008 | 45 | |||||||||||||||||||||||||
Oxygen Index | % | GB/T 2406.2-2009 | 32 | |||||||||||||||||||||||||
Thermal Aging Performance 135ºC*168h |
Tensile Strength | Mpa | GB/T 32129-2015 | 11.8 | ||||||||||||||||||||||||
Maximum Change Rate Of Tensile Strength | % | 7.3 | ||||||||||||||||||||||||||
Elongation At Break | % | 165 | ||||||||||||||||||||||||||
Maximum Change Rate Of Elongation At Break | % | -8.3 | ||||||||||||||||||||||||||
Thermal Extension 200ºC*15min*0.2MPa |
Elongation Under Load | % | GB/T 2951.21-2008 | 40 | ||||||||||||||||||||||||
Maximum Permanent Deformation After Cooling | % | 0 | ||||||||||||||||||||||||||
Dielectric Strength | MV/m | GB/T 1408,.1-2006 | 25 | |||||||||||||||||||||||||
Acidity of Gas Released by Combustion | HCl & HBr | % | GB/T 17650.1-1998 | 0 | ||||||||||||||||||||||||
HF | % | IEC 60684-2:2003 | 0 | |||||||||||||||||||||||||
PH | … | GB/T 17650.2-1998 | 5.5 | |||||||||||||||||||||||||
Conductivity | μS/mm | GB/T17650.2-1998 | 7.5 | |||||||||||||||||||||||||
*Appearance: Uniform color and no impurities. Evaluation: Qualified, meeting the requirements specified by ROHS. Note: The above typical values are random sampling data. |
Suppliers with verified business licenses