Feature: | Hydrolytic Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | 32131-17-2 |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||
LNP THERMOCOMP MX99432 compound is based on Polypropylene (PP) resin containing 15% glass fiber, 25% glass bead | |||
General | |||
Form | Resin Pellets | ||
Filler 25 % Glass Bead 15 % Glass Fiber | |||
Feature Low Warpage Good Hardness Structural | |||
Uses Consumer | Electrical | Building and Construction | |
Physical | Nominal Value | Test Method | |
Density / Specific Gravity | 1.22 g/cm³ | ASTM D792 | |
Mold Shrinkage, Flow(24 hrs) | 0.2 % | ASTM D955 | |
Mechanical | Nominal Value | Test Method | |
Izod Impact, Unnotched(23 °C) | 509 J/m | ASTM D4812 | |
Izod Impact, Notched(23 °C) | 74 J/m | ASTM D256 | |
Tensile Stress, Break | 57 MPa | ASTM D638 | |
Tensile Strain, Break | 2.9 % | ASTM D638 | |
Tensile Modulus(50 mm/min) | 5270 MPa | ASTM D638 | |
Flexural Stress | 89 MPa | ASTM D790 | |
Flexural Modulus | 4610 MPa | ASTM D790 | |
Thermal | Nominal Value | Test Method | |
Heat Deflection Temperature[HDT], Unannealed(3.2 mm;1.82 MPa) | 145 °C | ASTM D648 | |
Processing | Nominal Value | ||
Drying Temperature<Injection> | 80 °C | ||
Drying Time<Injection> | 4 hrs | ||
Melt Temperature<Injection> | 225 - 250 °C | ||
Front, Zone 3 Temperature<Injection> | 240 - 250 °C | ||
Middle, Zone 2 Temperature<Injection> | 215 - 225 °C | ||
Rear, Zone 1 Temperature<Injection> | 195 - 205 °C | ||
Mold Temperature<Injection> | 30 - 50 °C | ||
Back Pressure<Injection> | 0.2 - 0.3 MPa | ||
Screw Speed <Injection> | 30 - 60 rpm |