Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||
Description General Purpose Application IT/OA, E&E, Automotive (Connector) | ||
General | ||
Form Resin Pellets | ||
Filler 15 % Glass Fiber | ||
Uses Automotive Connector | Electrical | |
Physical Nominal Value | Test Method | |
Density / Specific Gravity 1.41 g/cm³ | ASTM D792 | |
Melt Mass-Flow Rate, MFR(250 °C;2.16 kg) 30 g/10min | ASTM D1238 | |
Molding Shrinkage - Flow, Injection Molded(23 °C) 0.40 - 1.1 % | ASTM D955 | |
Water Absorption(24 hr;23 °C) 0.070 % | ASTM D792;ISO 1183;ASTM D570 | |
Mechanical Nominal Value | Test Method | |
Tensile Strength, Break, Injection molded(5 mm/min;23 93.2 MPa °C;3.2 mm) | ASTM D638 | |
Tensile Elongation, Break, Injection Molded(5 mm/min;234.0 % °C;3.2 mm) | ASTM D638 | |
Flexural Modulus, Injection Molded(1.3 mm/min;23 °C;3.2 mm) | 4900 MPa | ASTM D790 |
Flexural Strength, Injection Molded(1.3 mm/min;23 °C;3.2147 MPa mm) | ASTM D790 | |
Notched Izod Impact, Injection Molded(23 °C;3.2 mm) 44 J/m | ASTM D256 | |
Thermal Nominal Value | Test Method | |
Deflection Temperature Under Load, Unannealed, | ASTM D648 | |
Injection Molded | ||
0.45 MPa;6.4 mm 210 °C | ||
1.8 MPa;6.4 mm 205 °C | ||
RTI Elec 140 °C | UL 746 | |
RTI Imp 130 °C | UL 746 | |
RTI Str 140 °C | UL 746 | |
Flame Rating | UL 94 | |
0.71 mm HB | ||
1.5 mm HB | ||
3.3 mm HB |
Electrical | Nominal Value | Test Method |
Volume Resistivity(23 °C) | 1.0e+17 ohms ·cm | ASTM D257 |
Dielectric Strength(23 °C;1 mm) | 25 kV/mm | ASTM D149 |
Arc Resistance | PLC 6 | ASTM D495 |
Comparative Tracking Index, CTI, Solution A | PLC 1 | UL 746 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 120 °C | |
Drying Time<Injection> | 4.0 - 5.0 hr | |
Suggested Max Moisture<Injection> | 0.020 % | |
Rear Temperature<Injection> | 235 - 250 °C | |
Middle Temperature<injection> | 240 - 250 °C | |
Front Temperature<Injection> | 245 - 255 °C | |
Nozzle Temperature<Injection> | 245 - 255 °C | |
Processing Temp, Melt<Injection> | 245 - 255 °C | |
Mold Temperature<Injection> | 60 - 100 °C | |
Peak Melting Temperature | 223 °C |