T-1000S SD card led pixel controller
T-1000S System features:
1). 32~256 Gray level, Support software Gamma correction.
2). Support the rules and special-shaped handle.
3). Single-port output, can support 2048 pixels.
4). Off-line(SD Card) control, play back content stored in the SD card.
5). T-1000S store a maximum of 16 programs, copy multiple files to the SD card in order, after formatting the SD card as "FAT" format.
6). The program must be named in orders. Just as: 00_1. Led, 01_1. Led, 02_1. Led.
7). Compatible with single line or double line chips.
NOTE:
1). When T-1000S controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.
2). T-1000S must use the new software LedEdit 2012.
| T-1000S SD Card led Pixel Controller |
| Support Chips: |
| Chip type |
Software code&Controller type |
Lamps/(MAX) |
Note |
| LPD6803,D705,1101,6909, 6912 |
T-1000-6803 |
2048 pixels |
|
| LPD8806,LPD8809 |
T-1000-8806 |
2048 pixels |
|
| TM1803,TM1804,TM1809,TM1812 |
T-1000-TM |
2048 pixels |
TM1804 and TM1809 are divided into high and low |
| TM1903,TM1904,TM1909,TM1912 |
T-1000-TM19 |
2048 pixels |
|
| UCS6909,UCS6912,UCS7009,UCS5903 |
T-1000-UCS-32 |
2048 pixels |
|
| UCS1903,UCS1909,UCS1912 |
T-1000-UCS-256 |
2048 pixels |
1903 and 1909 are divided into high and low |
| UCS3903 |
T-1000-UCS-1024 |
2048 pixels |
|
| DMX512 |
T-1000-DMX |
170/512 pixels |
Compatible with standard DMX512 |
| WS2801,WS2803 |
T-1000-WS |
2048 pixels |
|
| WS2811 |
T-1000-WS2811 |
2048 pixels |
WS2811 be divided into high and low |
| DS189 |
T-1000-DS189 |
2048 pixels |
|
| TLS3001,TLS3002,TLS3008 |
T-1000-TLS |
* pixels |
|
| P9813 |
T-1000-P9813 |
2048 pixels |
|
| SM16715 |
T-1000-SM16715 |
2048 pixels |
SM16715 be divided into high and low |
| SM16716 |
T-1000-SM16716 |
2048 pixels |
|
| BS0901,BS0902 |
T-1000-0901 |
2048 pixels |
|
| BS0815 |
T-1000-0815 |
2048 pixels |
|
| |
| Definition of printing: |
| Buttons |
Meaning |
| SET |
Save Settings (to save current settings file and the playback speed) |
| MODE |
Change programs |
| SPEED+ |
Speed up |
Press speed+ and speed- at the same time the program will play circularly. |
| SPEED- |
Speed down |
| |
| DC5V |
+5V power input |
| GND |
Power GND input |
| 7.5-24V |
+7.5~24V power input |
| POWER |
Power indicator |
| ERROR |
Error indicator |
| SD CARD |
SD card slot |
| |
| TTL signal(245/spi signal) |
RS485 signal |
| CLK |
Clock signal |
B |
Signal A / DMX+ |
| DAT |
Data signal |
A |
Signal B / DMX- |
| GND |
Signal ground |
GND |
Signal ground |
| NOTE: For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly. |
Welcome to contact with us for more information
NOTE:
){kind=link}
){kind=link}