Material: | PE |
---|---|
Kind: | Engineering Plastic Sheet |
Water Absorption: | <0.01% |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Comparison of Synthetic Ice Rink and Real Ice Rink |
||
|
Synthetic ice rink |
Real ice rink |
Operating environment |
Outdoor and indoor, all season |
Only indoor |
Site requirements |
Any flat ground, any size is available |
Strict infrastructure, power distribution |
Investment cost |
1/5 cost of real ice rink |
Millions |
Performance |
95% as high quality real ice |
low quality not good as synthetic ice |
Maintenance |
Clean depending on |
Cleaning, polishing, continuous replenishment required |
Environment |
Non-toxic, non noxious gas, recyclable |
high energy consumption |
Professionals |
No need |
Needed |
Energy consumption |
Lighting |
Refrigeration, electricity, water |
Operation cost |
Very low |
High water and electricity bill |
Installation period |
Two weeks |
Several months |
Service life |
Above 10 years |
Regular maintenance |
Property | Test Method | Reference range | Unit |
Molecular Weight | 1.5-9 million | ||
Density | ISO 1183-1:2012/ DIN53479 | 0.92-0.98 | g/cm³ |
Compression Strength | ISO 604:2002 | ≥32 | Mpa |
Tensile Strength | ISO 527-2:2012 | ≥22 | Mpa |
Elongation at break | ISO 527-2:2012 | ≥300 | % |
Dynamic Friction Coefficient | ASTM D 1894 /GB 10006-88 | ≤0.18 | |
Notched impact strength (charpy) | ISO 179-1:2010/GB/T 1043.1-2008 | ≥100 | kJ/m2 |
Abrasion wear index | ES-X60210-2008 | ≤30 | mg |
Vicat softing point | ISO 306:2004 | ≥80 | ºC |
Hardness Shore-D | ISO 868:2003 | 61-66 | D |
Suppliers with verified business licenses