PUSH-IN Feed through connection Industrial Din Rail Terminal block Connector UPT-6 Series
For power distribution blocks, the terminal blocks can be bridged with each other using conductor shafts, the corresponding plug-in bridges can be found in the accessories at the bottom.
Wiring method: Push-in spring connection.
Rated wiring capacity: 2.5mm2.
Installation method: NS 35/7,5,NS 35/15,
The Push-in direct connection technology make the insertion forces reduced by up to 50 percent and tool-free wiring, enable the conductors to be inserted easily and directly.
- Made from engineering flame retardants nylon PA66 with brass screw metal.
- The Push-in connection terminal blocks are characterized by easy and tool-free wiring of conductors with ferrules or solid conductors.
- The compact design and front connection enable wiring in a confined space.
- In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection.
- With universal foot which can be installed on Din Rail NS 35.
- It can connect two conductors with ease, even large conductor cross sections are not a problem.
- Electric potential distribution can use fixed bridges in the terminal center.
- All types of accessories: End cover, End Stopper, Partition plate, marker trip, fixed bridge, insertion bridge, etc.
Name |
Date |
Unit |
Number of connection points |
2 |
|
Number of potentials |
1 |
|
Color |
gray |
|
Length |
57.7 |
mm |
Width |
8.2 |
mm |
With U-rail height |
43.7 |
mm |
Pollution degree |
3 |
|
Insulation material group |
|
|
Rated surge voltage |
8 |
KV |
Meet standard |
IEC60947-7-1 |
|
Rated voltage |
1000 |
V |
Nominal current |
41 |
A |
Meet standard |
UL1059 |
|
Rated voltage |
600 |
V |
Nominal current |
40 |
A |
Min.connection capacity for solid wire |
0.5/20 |
mm²/AWG |
Max.connection capacity for solid wire |
10/8 |
mm²/AWG |
Min.connection capacity for strand wire |
0.5/20 |
mm²/AWG |
Max.connection capacity for strand wire |
10/8 |
mm²/AWG |
Line direciton |
Top connection |
|
Strip length |
10-12 |
mm |
Insulation material |
PA66 |
|
Flame-retarded Rating |
UL94 V-0 |
|
certification |
|