Product Description
Lab Kneader, Labratory Kneading Machine,Banbury Dispersion Kneader
Feature:
1. Mixing chamber volume: 2.5L-3L
2. Main motor: AC motor, power 7.5 kW
3. Reducer: The base and frame are made of low carbon steel and contain a forced lubrication circulation system;
4. Rotor: Two-edge, synchronous rotor structure (can also be designed according to the rotor structure diagram provided by the user), the front-to-back rotor speed ratio is 1:1.20 or ST synchronous rotor specific parameters can be customized free of charge according to customer requirements, cast steel quenching and hardening Treatment, surface hard chrome plating; bearing is ball bearing roller bearing; bearing lubricating oil bath; rotor speed: 3L: 36 rev / min specific speed can be customized according to customer needs
5. Face wall: steel structure, drilling heating, hardening of inner surface hardened chrome;
6. Bracket: steel structure, hardened chromium plated inner surface;
7. Top plug: cylinder drive, hard chrome plated
8. Face seal: high quality wear-resistant material for sealing ring, self-lubricating bearing, hinged spring top seal
9. Feeding hopper: manual operation
10. Control mode: operation is divided into manual and semi-automatic;
Mixer temperature: tap water - normal temperature - 300 ° is the standard temperature. Have done temperature to 650 °
Mechanical body
11. Base frame is made of steel and steel plate welded
12. Mixing chamber The middle tank is made of wear-resistant alloy steel.
The side wall is made of medium carbon steel plate welded
13. Mixing shaft, alloy steel for shaft and blade
14. Bearing housing made of ZG20 steel, bearing using roller bearing
15. Feeding device This machine is designed as the front feeding device, and the pressure can be adjusted according to the user-specified gas valve.
16. Leak-proof device The side end of the stirring shaft is tightened by mechanical shaft seal, and the leak-proof structure is awarded a certificate.
Pressurized cover device
17. Pressurized cover made of alloy steel, applying pressure to the raw material during the mixing operation, and vertical lifting operation with the air cylinder
Unloading device
18. Structure Mixing chamber hydraulic tilting discharge
19. Tilt angle 110°~135°
20. Tilting force: hydraulic dump
Applications
Rubber Industry
Plastic Industries
Chemical Industries