Product Details
About Us
Weeemake has cooperated with more than 10,000 schools in more than 60 countries around the world, and holds dozens of competitions around the world every year, making outstanding contributions to global STEM education. We integrate R&D, production and sales, providing professional teaching, training resources, and competition solutions.
Product Description
4WD Mecanum Chassis Robot Education Kit for micro:bit / mPython Board
An expansion set for micro:bit V2 and mPython board. The product is equipped with up to 10+ electronic modules and can assemble 11 robot projects including a four-wheel drive moving robot chassis for rich robot applications.
2 in 1 shield board for micro:bit and mPython board
ELF 2 IN 1 Shield Board is an expansion board which support micro:bit V1, micro:bit V2 and mPython board.
This shield board comes with one controller slot, 4 x RJ11 port (Weeemake sensors), 4 x DC motor ports, 2 x servo motor ports, 1x IR receiver, 1 x 18650 rechargeable Li-ion battery, and 1 x microUSB port for battery charging.
Simple but powerful to drive a 4WD robot chassis, or more projects.
Specification
|
Mainboard:
|
ELF Shield for micro:bit/mPython board
|
|
External Electronics:
|
RGB ultrasonic sensor
|
|
Double-way line-following sensor
|
|
|
IR avoid sensor
|
|
|
Water sensor (raindrop)
|
|
|
Touch sensor
|
|
|
Temperature and humidity sensor
|
|
|
Combustible Gas MQ2 Sensor
|
|
|
4-digit LED display
|
|
|
Joystick
|
|
|
Potentiometer
|
|
|
Onbard Electronics:
|
1x IR Receiver
|
|
1x 18650 Lithium battery
|
|
|
User:
|
Entry-level (8+)
|
|
Software:
|
WeeeCode (Scratch + Python)
|
Company Profile
Certifications
Our Exhibition
FAQ
Q:When l turn on the robot, my robot has no response, why?
A:
1. Low voltage, please recharge all your batteries or replace withnew batteries.
2. Batteries installed in wrong polarity (+/-)
3. 3.incorrect wring on battery holder or motor.
Q:When l controlled the robot to move forward, it moved backwards.
How can l fix this?
A:The wiring of the motor is connected reversed. Please reconnect.
Q:How to program my robot or restore the factory setting of my robot?
A:
Please download WeeeCode software on our website, connectrobot to PC via USB cable, select serial port "COM x" and main-board type in software to start coding your robot.
"Restore Firmware" menu offers different options: "Online Firm-ware" support you make live testing of your program, robot willresponseimmediately; "Factory Firmware" will resume the factoryprogram and settings for your robot; "Mobile Firmware" supportsrobot control and program on WeeeMake APP
Q:l cannot connect robot to computer via USB cable nor wirelessway, how can l fix it?
A:Your computer hasn't installed the driver of the mainboard.Please install driver in WeeeCode software "Help" menu, restartthe robot, and connect to computer again.
Q:Why cannot the robot move with USB power supply?
A:USB power supply can only support chip and sensors in main-board.To drive motors or servos, please connect batteries andswitch on the power button.
Q:Why doesn't the Line-following Sensor work?
A:Please:
1. Make sure the distance between Line-following sensor andline-following map is between 1-2cm, this is the best workingrange.
2. Do not use Line-following mode under strong light. Strong lightwill interfere the function of Line-following Sensor.
3. Make sure to use unrefiecting material to make your ownline-following map.
Q:Why cannot the software read the value ofsensor?
A:Please check your wiring, make sure sensors are connected tothe same port with your program in the WeeeCode software.
Q:Can l get a customization robot for my project? OEM or ODM?
A:We offer customization services to our customer. Please contactus for more detail ingquiry
A:
1. Low voltage, please recharge all your batteries or replace withnew batteries.
2. Batteries installed in wrong polarity (+/-)
3. 3.incorrect wring on battery holder or motor.
Q:When l controlled the robot to move forward, it moved backwards.
How can l fix this?
A:The wiring of the motor is connected reversed. Please reconnect.
Q:How to program my robot or restore the factory setting of my robot?
A:
Please download WeeeCode software on our website, connectrobot to PC via USB cable, select serial port "COM x" and main-board type in software to start coding your robot.
"Restore Firmware" menu offers different options: "Online Firm-ware" support you make live testing of your program, robot willresponseimmediately; "Factory Firmware" will resume the factoryprogram and settings for your robot; "Mobile Firmware" supportsrobot control and program on WeeeMake APP
Q:l cannot connect robot to computer via USB cable nor wirelessway, how can l fix it?
A:Your computer hasn't installed the driver of the mainboard.Please install driver in WeeeCode software "Help" menu, restartthe robot, and connect to computer again.
Q:Why cannot the robot move with USB power supply?
A:USB power supply can only support chip and sensors in main-board.To drive motors or servos, please connect batteries andswitch on the power button.
Q:Why doesn't the Line-following Sensor work?
A:Please:
1. Make sure the distance between Line-following sensor andline-following map is between 1-2cm, this is the best workingrange.
2. Do not use Line-following mode under strong light. Strong lightwill interfere the function of Line-following Sensor.
3. Make sure to use unrefiecting material to make your ownline-following map.
Q:Why cannot the software read the value ofsensor?
A:Please check your wiring, make sure sensors are connected tothe same port with your program in the WeeeCode software.
Q:Can l get a customization robot for my project? OEM or ODM?
A:We offer customization services to our customer. Please contactus for more detail ingquiry
View More