After-sales Service: | 12 Months |
---|---|
Warranty: | 12 Months |
Movement Way: | Agitation |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Rotary dryer is widely used to dry materials in industries like cement, mining, construction, chemical, food, compound fertilizer, etc. Thermocouples are installed in feeding and discharging units to control temperature. A temperature change in the dryer also can be indicated by the thermometer, which is convenient for temperature control inside the dryer ( it is usually 250-350ºC). The dryer has the advantages of reasonable structure, high efficiency, low energy consumption, and convenience for transportation.
Model(m) FM-DM |
River sand output capacity(t/h) |
Fly ash output capacity(t/h) |
Slag output capacity(t/h) |
fly consumption kg/t drying materials |
Total power |
Φ2.0*2 | 4-5 | 2-3 | 3-5 | 12-14 | 5.5kw |
Φ2.0*4 | 8-12 | 4-6 | 8-10 | 12-14 | 3kw*2 |
Φ2.0*5 | 12-15 | 6-7 | 10-13 | 10-12 | 4kw*2 |
Φ2.2*4.5 | 14-18 | 7-9 | 12-15 | 10-12 | 5.5kw*2 |
Φ2.5*6 | 23-28 | 10-13 | 20-22 | 10-12 | 5.5kw*4 |
Φ2.8*6 | 30-35 | 15-18 | 25-30 | 10-12 | 5.5kw* |
Φ3.0*6 | 35-40 | 18-20 | 32-35 | 8-10 | 7.5kw*4 |
Φ3.0*7 | 40-45 | 20-25 | 35-40 | 8-10 | 7.5kw*4 |
Φ3.2*7 | 45-50 | 25-30 | 40-45 | 8-10 | 11kw*4 |
Φ3.2*8 | 50-55 | 30-35 | 45-50 | 8-10 | 11kw*4 |
Φ3.6*8 | 60-70 | 35-40 | 60-65 | 6-8 | 15kw*4 |
Φ3.8*9 | 70-80 | 40-45 | 70-75 | 6-8 | 15kw*4 |
Φ4.0*10 | 90-100 | 45-50 | 80-90 | 6-8 | 18.5kw*4 |
Φ4.2*8.5 | 80-100 | 45-60 | 80-90 | 6-8 | 18.5kw*4 |
(Capacity depends on the raw material moisture is 15%, and after drying moisture is 1-3%) |
1. Triple-drum rotary drier uses a telescope-feed structure, to dry the material quickly.
2. Simple design, and self-insulation, improve the heat efficiency to exceed 80%.
3. Using an alloy steel plate, wear it 3-4 times
than ordinary steel plate.
4. Good drying performance. coal consumption<8kg when drying 1 t material.
5. The fuel can be coal, oil, natural gas, etc, dry mass, and granule and powder material.
1. Three-cylinder dryer design, small heat radiating area, low coal, tailings power, fine powder material.
2. Compact structure, small power, low power consumption.
3. Covering small area, short installation period, small air volume, small supporting, low integral investment.
For providing you with a suitable quotation we need to know the following information:
1. What is the material that you are going to dry?
2. What is the capacity?
3. What is the moisture content both before and after the drying process?
4. What is the heat source?
Suppliers with verified business licenses