High Quality EPE Foam Sheet/Film Recycling Machine
The machine is used for EPS, XPS recycling and pelletizing, especially for sorting materials and trans- form rubbish into treasure.
I. Major Parts
Steel rack structure 1 set
Extruding unit 1 set
Feeding unit 1 set
Main engine control unit 1 set
Cut granule control unit 1 set
Mold-head 1 set
Cooling machine 1 set
II. Major Design Data
Diameter of screw: 240mm
The major axis rate of screw: 18:1(L/D)
Structure of screw: the cone in difference diameter, deepening, and pegging type.
Main screw rotate speed (r. p. m): 20-160
Capacity: 100-160kg/hr
The power of main electric machine: 30KW
Total power of heating machine: 12KW
Power of pelletizing knife electric machine: 3KW
Total capacity of electric: 30KW
Water sink: 0.45m×3.6m
Used material: EPE leftover material LDPE
Hauling speed: 300-400r/min
Specification of power: 380 × 50/60HZ × 3 phases
III. Demand of Public Project
Electric power: about 50KW
Cooling water: 0.5M
3/H
Pelletizing machine power: 3KW
Installation size: approx: 8000×600×1200mm
IV. Specification of Each Part
A. Steel rack structure: 1set, 240×600mm
B. Extruding unit 1 set
a) Deceleration box 200-12.5
--Model: helical gear without pole
--Material: forgeable iron
--Box body: FC20
-- Gear wheel: hard gear (special polishing and heating)
-- Motor 15KW, AC
Electromagnetism timing 0 to 1500 turns/min
b) Barrel and screw
- Diameter: ¢240mm
- Material: 38CrMoAlA, alloy steel, nitrogen
- Heating area: 4 sets
- Heating method: aluminum heater & belt heater
C. Mould specification: 300×450mm
Heating area: 1 zone
D. Water cooling groove specification: 600×2400×400mm
E. Pelletizing part: 3KW electromagnetism timing
V. Spare Parts List
Heating panel 2 pieces
Thermocouple 2 pieces
Heater 1 set
Die head heating loop 1 piece
Tool box 1 set
Hexagonal socket 1 set
Flexible wrench 1 set
Fixed wrench 1 set
| Model |
JC-XPS-HS160/90 |
JC-XPS-HS160/105 |
JC-XPS-HS160/120 |
JC-XPS-HS160/135 |
| Screw dia. |
mm |
Ø160/Ø90 |
Ø185/Ø105 |
Ø200/Ø120 |
Ø250/Ø115 |
| L/D rate |
|
4:1~8:1 |
4:1~8:1 |
4:1~8:1 |
4:1~8:1 |
| Screw speed |
r/min |
560/65 |
560/65 |
560/65 |
560/65 |
| Output |
kg/h |
60-90 |
100-150 |
150-180 |
200-250 |
| Installed power |
KW |
15-4 |
22-5.5 |
30-7.5 |
45-15 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}