High Performance Drying Blow-off and Cleaning for Air Knife
Air knife in the industrial field there are a lot of hair except water, blowing dust and other applications,such as blowing in addition to steel, aluminum alloy profile plane of dust, moisture, blowing in addition to the moisture on the surface of beverage bottles, cans and other packaging bottle blowing product on the surface of the dust and impurity removal, residual liquid, water on the outer packing, and the conveyor belt cleaning.In the compressed air supply conditions, air knife can meet the application of perfect.
Item# |
Length,inch |
Length,mm |
304 SS-12 |
12'' |
300mm |
304 SS-18 |
18'' |
450mm |
304 SS-20 |
20'' |
500mm |
304 SS-24 |
24'' |
600mm |
304 SS-30 |
30'' |
750mm |
304 SS-36 |
36'' |
900mm |
304 SS-40 |
40'' |
1000mm |
Inlet direction can be customized on the side/body/top
Air Knives Application:
The wind blade has a strong wind curtain, which can be used for various blowing and wind cooling applications, for example:
1. The automotive industry: used for blowing in the manufacture of additional water, cooling liquid, dust, debris, etc., as well as steel plate spray before cooling, drying, dust.
2. The electronics industry: electronic circuit board drying fast before assembly.
3. Canned drinks and bottles: beverage bottle label, inkjet or packaging, bottle or bottle of water and attachments blowing.
4. Chemical industry: labeling or packaging, the surface of chemical substances or water blowing.
5. The food and medicine in manufacturing or packaging, the moisture and attachments or dust blowing, bagging and bag before opening.
6. Metal industry: from the surface of the metal blowing coolant or other liquid. Rolling mill emulsion blowing. Yu Paoguang, plating, painting process before the surface drying or cooling.
7. Rubber and plastic material industry: blowing dust or debris from the surface of the product. Dry before extrusion or injection. Cooling after injection molding.
8. Printing (ink jet): inkjet, pre printing dust, debris, water vapor blowing, or the use of rapid drying ink.
Advantages of stainless steel air knife
1.Adopt all stainless steel SUS304 or pharmaceutical 316 sanitary stainless steel, higher hardness, higher endurance
2.The structure adopts the unique design to ensure that the wind resistance is small, the wind speed is uniform, and the accuracy can reach ±5%
3.Air outlet width is adjustable, adjustable range 0.3 ~ 3mm
4.Wind knife length and size can be customized according to customer requirements, the length can reach 6m
5.A variety of inlet diameters and positions are available to meet the requirements of screw connection or hose connection, convenient installation
6.Can accept the highest wind speed 400m/s, the highest temperature 250ºC, the maximum pressure 5kGF /cm2
Notices:
1. Pay attention to avoid colliding with the knife edge. The compressed air used should avoid containing too coarse impurity particles to avoid blocking or damaging the knife edge.
2. The width of the tuyere has been calibrated according to the customized requirements when the product leaves the factory. If necessary,
please deliver it to the original merchant or professional for calibration to avoid weakening the product performance due to self-calibration.
Accessories :
We also have some parts for your application, if you need, welcome to tell me.
Air filter: Filter the dust particles, apply to a bad environment.
Pressure relief valve: Control gas pressure, prevent excessive pressure, damage the machine.
Muffler: reduce blower noise 5-10db, apply to a quiet environment.
Company Information