Four Roll Crusher
Maximum feed:<90mm
Production capacity:5-300(t/h)
Features:It is characterized by low maintenance cost, large crushing ratio, low water requirement, low power consumption, reliable performance, low dust and low noise.
Applicable materials:Iron ore, quartzite, potassium (sodium) feldspar, limestone, river pebbles, metallic silicon, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, quicklime, coal, coke, water slag, clay, gypsum, bentonite, fertilizer
Four Roll Crusher Product Description
Four-roll crusher is suitable for solid materials with compressive strength less than 300Mpa and water less than 30%, and it is required to have fine and medium crushing operation with large crushing ratio. Such as crushing iron ore, quartzite, potassium (sodium) feldspar, limestone, river pebbles, silicon, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, lime, coal, coke, water slag, clay, gypsum, bentonite, fertilizers, chemical raw materials and other solid materials. It is characterized by low maintenance cost, large crushing ratio, low water requirement, low power consumption, reliable performance, low dust and low noise.
Four rolls crusher is equipped with four crushing rolls, four rolls can choose toothed roll surface, surfacing roll surface, flat roll surface at will, suitable for feeding size less than 90mm, finished product size requirements of 0.3-10mm medium and fine crushing operations.
If the compressive strength of the material is more than 200Mpa, it is recommended to choose the aggravated model. Transmission mode can be divided into two kinds according to the user's requirements: triangle belt and coupling transmission (hard link). This equipment in the mine without electricity can be changed to diesel or gasoline engine as power.
Four Roll Crusher Working Principle
The four-roll crusher utilizes four high-strength wear-resistant crushing rolls, which rotate relative to each other to produce high squeezing and shearing force to crush materials. After the material enters the gap between the upper two rolls (V-shape crushing chamber), it will be squeezed and sheared by the relative rotation of the two rolls, the material will be squeezed and sheared for the first time (coarse crushing), and then it will enter into the relative rotation of the lower two rolls, and then squeezed, sheared and ground by the lower two rolls (fine crushing) into the required granularity from the discharge port.
| NO |
Model |
Feed size
(mm) |
Output size
adjustable(mm) |
Capacity
(t/h) |
Motor power
Kw |
Protection |
Transmission |
| 1 |
4PG-20PT |
<20 |
0.3-10 |
2-30 |
26-37 |
spring |
V belt
or
coupling |
| 2 |
4PG-40PT |
<40 |
0.3-10 |
5-60 |
37-75 |
| 3 |
4PG-50PT |
<60 |
0.3-10 |
8-90 |
67-90 |
| 4 |
4PG-80PT(Y) |
<60 |
0.3-10 |
12-120 |
75-100 |
spring
or
hydraulic |
| 5 |
4PG-100PT(Y) |
<60 |
0.3-10 |
20-180 |
100-132 |
| 6 |
4PG-110PT(Y) |
<80 |
0.3-10 |
30-220 |
132-165 |
| 7 |
4PG-120PT(Y) |
<90 |
0.3-10 |
45-260 |
165-200 |
| 8 |
4PG-160PT(Y) |
<90 |
0.3-10 |
55-300 |
200-250 |
| 9 |
4PG-180PT(Y) |
<90 |
0.3-10 |
70-350 |
242-300 |
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}