| After-sales Service: | 24 Hours |
|---|---|
| Warranty: | 1 Year |
| Max Diameter of Workpiece: | <500mm |
| Samples: |
Confirm order after communication
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier STATIC PRESSURE AND BURST TEST EQUIPMENT
The main function:
MPT series bursting pressure test bench can carry out water (oil) pressure test on various pipelines and containers. For different test purposes, multi-step pressure test and burst test can be carried out on the tested parts by pressure setting.
Description of equipment actions and the functions implemented
Product overview
MLS series burst pressure test bench can carry out water (oil) pressure test on various pipelines and containers. For different test purposes, multi-step pressure test and blast test can be carried out on the test piece by pressure setting.
Description of equipment actions and the functions implemented
1. Perform pressure burst test on hoses, hoses, etc.;
2. Use a pneumatic booster system to adjust the boost rate within a certain range as needed;
3. Using the pneumatic supercharger independently developed by our company as the supercharging device, the boosting speed is fast and the pressure is stable;
4. Manually operated valve control, double gauge memory type pressure gauge displays pressure, wherein the red needle can be fixed at the maximum pressure value, and manually return to zero after the recording is completed;
5.Typical test procedure:
Constant speed boost-bursting
Constant speed boost-Holding pressure-bursting
Constant speed boost-Holding pressure-Pressure relief
Constant speed boost-Holding pressure-constant speed boost-Holding pressure-Until bursting
Technical Parameters
| number | Project requirements | Performance indicators |
| 1. | Subject | PVC hose |
| 2. | Features | Pressure resistance, burst test |
| 3. | Test medium | Water/prepared by customer |
| 4. | Test pressure | 1~8MPa/Can be set in the range |
| 5. | Pressure test accuracy | ±0.5%F.S |
| 6. | Pressure control accuracy | ±2%F.S |
| 7. | Boost rate | 10KPa/S(Set the boost rate as needed) |
| 8. | Medium temperature | Room temperature |
| 9. | Ambient temperature | Room temperature |
| 10. | Simultaneous test pieces | 1 item |
| 11. | control method | Automatic control(PLC control, touch screen set test parameters) |
Test bench structure
| The main components | Detailed composition | Function description |
| power system | Low-pressure compressed air (user-supplied), water tank, gas-liquid booster pump, filter and piping | Providing a pressure source for the test bed booster system; |
| Drive gas source treatment | Drive air line with two parts, filter | Filter and oil mist treatment for drive line gases |
| Test cabinet | The frame structure is welded for ordinary carbon steel profiles | Surface anti-rust and spray decoration treatment |
| Control System | Composed of pneumatic proportional valve, solenoid valve, high pressure gas control needle valve, etc. | Controlling the pressure of the gas source to control the pressure of the high pressure liquid from the gas-liquid booster pump |
| Liquid filled exhaust system | The system consists of a water pump, a filter, and a solenoid valve. | Manual exhaust, close the charge pump and solenoid valve after the test piece is filled with the test medium |
| Test piece installation room | The test room consists of a liquid filling system.. | Workpiece installation, -- station design |
| Electrical control system | Electrical control panel in the electrical cabinet | |
| measuring system | Pressure sensor, pressure gauge, etc. | Data measurement for pressure |
| Control System | PLC control: PLC controller is installed in the operation cabinet, and the external touch screen is used for control operation; | The test setup and operation are completed by touch screen operation, the control program is mature, the interface is humanized, and the operation reliability is high; |
| Machine Name | Manual Control Hydraulic Pressure Test Bench |
| Tested object | Fire Hydrant |
| Features | Pressure Test |
| Test medium | Water |
| Test Pressure | 1~500 bar (Can be set in the range) |
| Pressure testing accuracy | ±0.5%F.S |
| Pressure control accuracy | ±2%F.S |
| Boost rate | # |
| Medium temperature | Room temperature |
| Ambient temperature | Room temperature |
| Simultaneous test pieces | 1 piece |
| Control | Manual control |
| Wooden Cases | Export standard fumigation wooden cases |
Q1. Where is your factory located ? How can I visit there?
Our factory is located in Jinan city, Shang dong Province, China. We can go to Jinan airport and wait for your arrival.
Q2 : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
Q3. How long can be finished the goods ?
A : Sample order : within one week ;
Large order : 15-25 days ; According to your purchase quantity.
Q4. At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q5 : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
Q6: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}