Type: | EP300 |
---|---|
Material: | Rubber |
Inside Material: | Fabric |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Pipe Conveyor Belt
INTRODUCTION
Our airslide hose are usually used for bulk cement trailer discharging. It always woking on the bottom of the trailer. Through inflation by air compressor, it makes the bulk cement discharging from the trailer. Some people called Aeration hose. It is really very similar as Fire hose frame. But it's much more strength and impact toughness than fire hose. One side of our hose is the PU coating. It is for block off the air flow.
One side permeable,good abrasion resistance and long service life all synthetic.
One side PU coated,standard colour yellow PU-coating increases the abrasion resistance and supports at the same time the air permeability of the uncoated saide
Material:
Warp:100% polyester high tenacity fiber
Weft:100% polyester high tenacity filamen
Characteristics:
One side air permeable,other side PU-coated.Good abrasion resistance and long service life all aynthetic,lightweight and flexible,easy to coil ageing and ozone resistant-weather resistant minimum maintenance.
cold resistant to -30°c
heat resistant to +160°c
Aertion of bulk powders and granular in silos and silo wagons.
Description | EP conveyor belts |
Fabric structure warp: | polyester |
Fabric structure weft: | polyamid |
Fabric specs
|
1.45mm/ply
|
Cover thickness upper:
|
1.5-12
|
Cover Rubber grade |
8MPA,10MPA,12MPA,15MPA
18MPA,20MPA,24MPA,26MPA
|
DIN-X,Y,W
RMA-1,RMA-2
N17,M24
|
Belt width (mm) |
500,600.650,700,800,1000,1200
1400,1500,1800,2000,2200,2500
|
18",20",24",30",36",40",42"
48",60",72",78",86",94"
|
Tensile strength |
EP315/3,EP400/3,EP500/3,EP600/3
EP400/4,EP500/4,EP600/4
EP500/5,EP1000/5,EP1250/5
EP600/6,EP1200/6
|
330PIW, 440PIW |
Top+Bottom thickness | 3+1.5, 4+2, 4+1.5, 4+3, 5+1.5, | 3/16"+1/16", 1/4"+1/16" |
Belt thickness | 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,12mm,15mm,20mm,25mm | |
Belt length | 10m,20m,50m,100m,200m,250m,300m,500m | |
Belt edge type | moulded(sealed) edge or cut edge |
Suppliers with verified business licenses