Ecoographix Non-Processing Negative working CTCP Plate for Offset Printing
Direct on Press CTCP Plate
Chemistry free,Environmental-friendly and Cost-effective
Used on Basysprint, Luchure , Cron or EcooGraphix UV series Platesetter
ECOO-H CTCP plate is a negative working environmental-friendly processless UV CTP printing plate. ECOO-H plate can run on press machine directly after CTP exposing, no need chemistry processing. It is double layer plate: emulsion layer is on the aluminum, and protection layer is above emulsion layer.
The emulsion layer is negative photopolymerization /cross-link, can be exposed by 800-850nm wave-length. So all the known CTCPs (can expose normal ctcp plate) on the market can expose this plate, only set up the exposure parameter to "negative".
The protection layer is water-soluble polymer. It is mainly used to protect the emulsion layer high sensitivity (low exposure energy required), and from damaging as well. Therefore, it is important to keep the plate away from any water, steam or even sweat materials.
ECOO-H plate will be affected by high temperature and high humidity. Recommended shipment and storage condition is 18-25 OC, RH 30-50%.
Model |
ECOO-H |
Plate Type |
Non-ablation UV CTP-negative type |
Application |
High grade commercial and newspaper printing |
Substrate |
Electrolyte graining and Anodized AL substrate |
Thickness |
0.15mm / 0.30mm |
Maximum short grain width |
Maximum width 1280 mm |
Photosensitive wave length |
405 nm |
Platesetter |
Various dominant UV platesetters in the market |
Image color |
Gray |
Low-energy imaging |
20 mj/ cm² |
The period of latent image stabilization |
≤7 days |
Recommended screen method |
1-99 @200 Lpi AM / 20u FM and mixture |
The paper number of start-up |
<50 sheets |
Safety light |
1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
Processing |
Without processing, directly on press |
Run Length |
100,000 impressions Actual run length depends on printing conditions |
Shelf life |
12 months under recommended |
Transportation |
Packed in seal and stored by means of preventing from light / moisture, over heat and high humidity |
Storage |
Recommended condition: 18ºC~24ºC, 40%-50% RH. |
Vedios on Youtube: https://youtu.be/1bn_ScXC-5A
Our Factory:
More Information, Please CONTACT:
Ms.Merry TAO
Hangzhou EcooGraphix Digital Technology Co.,Ltd.
Add.: Unit 708,Tianheng Building,1509 Binsheng Rd.,Hangzhou,China
ecoographix.en.made-in-china.com