| Type: | Cement |
|---|---|
| Purity: | 99% Mmin |
| Concrete Screed Additive: | Concrete Screed Additive |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Hydroxypropyl Methylcellulose (HPMC) is an odorless, non-toxic white powder. After fully dissolved in water, it will form a transparent viscous solution. It is a non-ionic cellulose ether made from natural polymer materials through a series of chemical processing. It has the characteristics of thickening, adhesion,dispersion,emulsification, film formation, suspension,adsorption, gelation, surface activity, retention of moisture and protection of colloids.
HPMC For Wall Putty
Skim coat (also named by Wall Putty) is a decorative and functional trowelling plaster material for interior or external wall construction. It's function is to remove uneven defects on the surface of the base materials of wall, and eliminate the stress between different coating layers.
HPMC For EIFS
ETIFS/ETICS is a kind of thermal insulation structure which is installed on the surface of exterior wall. It can reduce the influence of thermal bridge and deformation stress on the base wall. This products can give effectively improvement on the water retention, anti-stress cracking, open time, sag resistance, workability of the ETICS mortars.
HPMC for Self-leveling Mortar
This products gives the rheology and workability of the full range of flooring formulations. Improves ease of on-site application and ensuring exceptionally smooth, defect-free surfaces.
| Beipeng cementitious self-leveling compound Specification Standard | ||||||||
| Physical and dynamics properties | ||||||||
| surface layer | cushion layer | |||||||
| fluidity (mm) | at the beginning | ≥130 | ||||||
| in 20 mins | ≥130 | |||||||
| Flexural capacity | Mpa | ≥ 1.5 | ≥ 1.0 | |||||
| Rate of size change | % | -0.10 ~ +0.10 | -0.15 ~ +0.15 | |||||
| Impact resistance | No cracking or detachment from bottom plate | |||||||
| 24h compressive strength | Mpa | ≥6.0 | ||||||
| 24h flexural strength | Mpa | ≥2.0 | ||||||
| Friction resistance | mm3 | ≤400 | ≤800b | |||||
| Compressive strength class requirements (28d) | ||||||||
| C16 | C20 | C25 | C30 | C35 | C40 | C50 | ||
| surface layer | (≥) Mpa | - | - | 25 | 30 | 35 | 40 | 50 |
| cushion layer | 16 | 20 | 25 | 30 | 35 | 40 | - | |
| Flexural strength grade requirements (28d) | ||||||||
| F4 | F6 | F7 | F8 | F10 | ||||
| surface layer | (≥) Mpa | - | 6 | 7 | 8 | 10 | ||
| cushion | 4 | 6 | 7 | 8 | 10 | |||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}