Specification of Spray Booth YS-12-45 |
Inside dimension |
12000×4500×4000mm(L×W×H) |
Outside dimension |
12144×6396×4600mm(L×W×H) |
Pit |
2 rows of pits in the ground for exhaust air, dimension of each pit is 10000×760mm(L×W), with galvanized grilles made by twisted steel and flat bar above. |
Main door |
Folding door, 3-folds, 3500×3900mm(W×H), galvanized steel frame, with polystyrene(EPS) inside, colour: blue. |
Escape door |
1 unit, 800×2000 mm (W×H), colour: white |
Room body |
Profiled bar beams in the roof to strengthen the room body; wall panel thickness:70mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with polystyrene(EPS) insulation inside, colour: white. |
Lighting system |
Ceiling Lights: 16Units×4Pcs=64Pcs×36W, with electronic ballasts. |
Side Lights: 18Units×4Pcs=72Pcs×36W, with electronic ballasts, vertically set. |
Generator setting |
Intake air from side upper direction, exhaust air from back upper direction, quadrate steel frame, outside is white coated steel,inside is galvanized steel,filled with heat preservation material in the middle. |
Intake and exhaust air system2 units |
2 units, in total 4×5.5KW double-intake centrifugal fans for intake air, model YDW4.5S, air capacity is 15500m 3 /h for each fan. |
2×7.5KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-560H, air capacity is 25000m3/h for each fan. Equip manual dampers for exhaust air. |
Heating system2 units |
2 units RIELLO RG5S oil burners, heating productivity: 520000 Kcal/h, stainless steel heat exchanger, pneumatic dampers actuate from spraying to baking cycle. |
Filtering system |
Pre-filter, high efficiency filter(ceiling filter), exhaust fiberglass fiter, activated carbon filter. |
Roof Plates |
50mm thick EPS heat preservation panels. |