The Saturated Steam Retort is the oldest method of in-container sterilization used by human. For tin can sterilization, it's the simplest and most reliable type of retort. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation.
Model |
Effective
diameter |
Effective length |
Dimension |
Qty of food baskets |
Design Temperature |
Design Pressure |
L |
W |
H |
DTSZ/12-3 |
1200 |
2400 |
3149 |
1852 |
2177 |
3 |
147ºC |
3.5bar |
DTSZ/12-4 |
1200 |
3000 |
4216 |
2045 |
2538 |
4 |
DTSZ/12-5 |
1200 |
4000 |
4500 |
2100 |
2500 |
5 |
DTSZ/14-3 |
1400 |
3000 |
4500 |
2100 |
2500 |
3 |
DTSZ/14-4 |
1400 |
4000 |
5680 |
2200 |
2701 |
4 |
DTSZ/14-5 |
1400 |
5000 |
6500 |
2300 |
2700 |
5 |
DTSZ/14-6 |
1400 |
6000 |
7600 |
2300 |
2700 |
6 |
DTS is the only retort manufacturer approved by ASME in China.
Retort is designed and produced according to the requirements of GB150-2011 <steel pressure vessel manufacturing standard>. DTS is identified and has passed through ISO9001, ISO14001 system authentication and also passed the CE, America ASME as well as SGS, TUV, BV, EAC rated.
- Equipment is designed according to the GMP and FDA requirements.
- If the cycle is based on the temperature data given by the cold spot location, if all products loaded have the same contamination level, we guarantee the less than 1/1,000,000 containers contamination.
DTS is based in China, its predecessor was founded in 2001. DTS is one of the most influential suppliers for food and beverage sterilization manufacturing industry in Asia.
DTS is a high-tech enterprise integrating raw material supply, product R&D, process design, production and manufacturing, finished product inspection, engineering transportation and after-sales service.
The company has CE, EAC, ASME, DOSH, MOM, KEA, SABER, CRN, CSA and other international professional certification. It`s products have been sold to more than 35 countries and regions, and DTS has agents and sales office in Indonesia, Malaysia, Saudi, Arabia, Myanmar, Vietnam, Syria etc.. With high-quality products and perfect after-sales service, DTS has won the trust of customers and maintains a stable relationship of supply and demand with more than 130 well-known brands domestic and abroad.
Advantages
Uniform heat distribution
By removing the air in the retort vessel, the purpose of saturated steam sterilization is achieved. Therefore, in the end of come-up vent phase, the temperature in the vessel reaches a very uniform state.
Comply with FDA/USDA certification
DTS has experienced thermal verification experts and is a member of IFTPS in the United States. It fully cooperates with FDA-approved third-party thermal verification agencies. The experience of many North American customers has made DTS familiar with FDA/USDA regulatory requirements and cutting-edge sterilization technology.
Simple and reliable
Compared with other forms of sterilization, there is no other heating medium for the come-up and sterilization phase, so only the steam needs to be controlled to make the batch of products consistent. FDA has explained the design and operation of the steam retort in detail, and many old canneries have been using it, so customers know the working principle of this type of retort, making this type of retort easy for old users to accept
DTS R&D aims to provide customers with energy-saving, environmental, efficient and intelligent production line. To provide customer with best product service and best working environment is not only our aim, but also our responsibility.
- Installation engineer team
DTS owns a professional installation engineer team. Everyone has the experience of overseas installation. Our installation engineer will install the equipment and help training the operator on site. Meanwhile, help the customer to find the best sterilization process for customer's product.
- DTS remote after-sales service
c DTS remote service system plays its role, our engineers can directly connect to the control system of the retort machine via the network. We also guide customers to install and train the operator through online video. This remote service system has achieved 100% success in projects in Malaysia, India, Papua New Guinea, Mongolia, and Sri Lanka. It not only reduces the cost of engineer travel, but also guarantees the safety of us and our customers
1.How to install and maintain the machine?
Firstly, we will provide the installation guild with the machine for your reference.
Secondly, our company is responsible for training production workers for you, ensuring that the workers will be independent operation.
2.How can we get the matching accessories or wearing parts conveniently?
During the warranty, Our company can replace the accessories for free .Out of warranty,we can provide them at the preferable price. In fact, the wearing parts are standard parts that you could get it in your country at your convenience.