Task: | Program |
---|---|
Structure: | Combination |
Signal: | Continuous |
Function: | Automatic Control |
Certification: | RoHS, ISO: 9001, CE |
Condition: | New |
Customization: |
---|
Suppliers with verified business licenses
Order Data
Products data |
Order No. |
|
CTSC-200 V5 series CPU |
||
CPU224+ V5 version |
CPU224+:16KB program memory/108KB data memory,220VAC power supply,14DI*10DO relay output,2A,1 PPI, 1 Free Port, data permanent storage when power-down,support analog and CAN expansion board |
CTS7 214-1BD35-0X24 |
Performance Parameters
Physical Features |
|
Dimension(W×H×D) |
137×80×62mm |
Power dissipation |
7W |
Memory Features |
|
Program memory |
12KB+4KB |
Data memory |
8KB+100KB |
General Features |
|
Timers total 1ms 10ms 100ms |
256 4 16 236 |
Counters total |
256 |
Internal memory bits |
256 |
Stored permanently on power down |
Data permanent stored |
Sequential control relay (S) |
256 |
Time Interrupts |
2 with 1ms resolution |
Edge Interrupts |
4 rising edges and/ or 4 falling edges (I0.0,I0.1,I1.1,I1.5) |
Analog adjustment |
Non |
Boolean execution speed |
≤0.15µs |
Float execution speed |
≤8µs |
Clock |
embedded ,precision ±120s/m |
BD expansion board interface number |
1,Support CAN expansion board, analog expansion board,RS485 board |
System indicator |
3,STOP,RUN,SF |
RUN/STOP dial code |
Yes,2 |
Battery card interface |
Support,power supply below 2V,alarm bit SM195.0 |
Programming card and Memory card |
Support |
Rated input voltage |
24VDC |
Power supply Native and extended bus+5V +24V |
660mA 280mA |
Integrated Communication Function |
|
Communication Interface |
2 communication ports ,PORT0:PPI/Free port,RS485;FPORT0:PPI/Free port,RS485 |
PPI baud rates(baud) |
9.6k,19.2k and 187.5k |
Freeport baud rates(baud) |
1.2k ~ 115.2k |
Maximum number of sations |
32 stations per segment,126 stations per network |
Maximum number of masters |
32 |
Point-to-point (PPI master station mode) |
Yes(NETR/NETW), maximum 8 connections, and each connection has a maximum communication of 200 bytes |
MPI connect |
(1PG/1OP) 8 in total, 2 reserved |
Maximum cable length Isolated repeater applied Isolated repeater unapplied |
When it is 1000 m, baud rate is 187.5k; when it is 1200 m, 38.4k. 50m |
Integrated Communication Function (CANopen) - use for CAN communication board model CTH2-CAN-01S2-EB |
|||||||||||||
Communication Interface |
1(8 Pin) |
||||||||||||
Communication speed (kbps) |
1000 |
800 |
500 |
250 |
150 |
50 |
20 |
||||||
Maximum cable length(m) |
25 |
50 |
100 |
250 |
500 |
1000 |
2500 |
||||||
Maximum station address quantity |
127 |
||||||||||||
Station address range |
1-127 |
||||||||||||
Maximum number of master stations connect to slave stations |
32 |
||||||||||||
Collocation method |
CAN configuration blocks and EDS files |
||||||||||||
Maximum digital access |
Nomal IO |
CANopen IO |
|||||||||||
Byte |
Memory starting address |
Byte |
Memory starting address |
||||||||||
Input |
16 |
IB0 |
Input |
64 |
IB16 |
||||||||
Output |
16 |
QB0 |
Output |
64 |
QB16 |
||||||||
Maximum analog access |
Nomal IO |
CANopen IO |
|||||||||||
Channel |
Memory starting address |
channel |
Memory starting address |
||||||||||
Input |
32 |
AIW0 |
Input |
162 |
AIW64 |
||||||||
Output |
32 |
AQW0 |
Output |
162 |
AQW64 |
||||||||
Integrated Communication Function (CANopen) - use for CAN communication board model CTH2-CAN-01S2-EB |
|||||||||||||
Protocol |
CanFree |
||||||||||||
Use method |
Supported by internal library instructions |
I/O Features |
|
Number of integrated digital inputs |
14 |
Input type |
Sink/Source |
Number of integrated digital outputs |
10 |
Output type |
Solid-MOSFET |
Digital I/O mapping domain |
640DI/640DQ |
Analog I/O mapping domain |
194AI/194AQ |
Maximum number of expandable I/O module |
7 |
Pulse catch inputs |
14 |
High-speed counters Total Uniphase counters Bi-phase counters |
6 6×30KHz 4×20KHz |
Digital Input Features |
|
Number of integrated digital input |
14 |
Input type |
Sink/ Source |
Rated voltage |
24V DC |
Maximum continuous permissible voltage |
30V DC |
Surge voltage |
35V DC,continuously 0.5s |
Logical 1 Signal (minimum) Logical 0 Signal (Maximum) |
15 VDC,2.5mA 5 VDC,1mA |
Isolation(field side to logical circuit) |
500V AC,1min |
Simultaneous input |
14 |
Maximum cable length Shielded Unshielded |
500 M(standard input) 50 M(high-speed counters input) 300 M(standard input) |
Digital Output Features |
|
Number of integrated digital output |
10 |
Output type |
Relay,dry contact |
Rated voltage |
- |
Output voltage range |
- |
Logical 1 Signal (minimum) |
- |
Logical 0 Signal (Maximum) |
- |
Rated current per point |
2A |
Rated current for each common point |
- |
Leakage current (maximum) |
- |
Surge current(Maximum) |
7A |
Lamp load (maximum) |
30W DC/200W AC |
On resistance (contact) |
0.2Ω |
Isolation(field side to logical circuit) |
- |
Delay |
Off to on:- on to off:- |
Contact life at rated load |
100000 times on and off |
Simultaneous input |
All output point |
Parallel output |
Only when the outputs are in the same group |
Maximum cable length Shielded Unshielded |
500m 150m |
* Support new V2 programming card
* Ultracapacitors power-off protection time 10 hours and extended batteries for 200 days
* Alarm function for insufficient battery power of the battery card: when it is lower than 2V, the alarm bit SM195.0
RS485 communication port definition
Connector |
PIN |
PORT0(RS485) |
FPORT0(RS485) |
|
1 |
Shell Grounded |
Shell Grounded |
2 |
logically |
logically |
|
3 |
RS485+signal B |
RS485+signal B |
|
4 |
Send the application RTS |
Send the application RTS |
|
5 |
logically |
logically |
|
6 |
+5V,100Ω |
+5V,100Ω |
|
7 |
+24V |
+24V |
|
8 |
RS485-signal A |
RS485-signal A |
|
9 |
NC |
NC |
|
shell |
Shell Grounded |
Shell Grounded |
Suppliers with verified business licenses