Standard: | ASTM, JIS, GB, AISI, DIN, BS |
---|---|
Certification: | ISO, RoHS, IBR |
Surface Treatment: | Polished |
Technique: | Cold Rolled |
Application: | Boiler Plate |
Edge: | Slit edge |
Customization: |
---|
Suppliers with verified business licenses
Stainless Steel Coil | |
Type | 201,304,304L,316,316Ti,316L,321,309s,310,904L,410,410s,409,420,420J2,430,444,2205,2507,2304,301,317 |
Surface treatment | Hot rolled (HR), Cold rolled (CR), 2B, 2BA, BA ,NO.8,Brushed, Mirror,8K Mirror, Color Coating, Etched ,Anti-fingerprint,Water-Ripple,Perforated,Checkered |
Thickness | CR:0.05-8mm,HR:3-16mm |
Cold rolling lower trimming width | 0.3-0.9mm thickness Silt Edge:1000mm,1220mm |
0.3-0.9mm thickness Mill Edge:1010mm,1240-1250mm | |
1.0-3.0mm thickness Silt Edge:1000mm,1220,1500mm | |
1.0-3.0mm tihckness Mill Edge:1010mm,1240-1250mm,1520-1540mm | |
4.0-8.0mm thickness Silt Edge:1500mm,1800mm,2000mm | |
4.0-8.0mm thickness Mill Edge:1520mm-1540mm | |
Packing | use iron steel packing,the MOQ is 2 tons as a roll and also accept your packing requirments |
Surface
|
Feature | Manufacturing Method | Usage |
NO.1 | Silvery white, dull | Hot rolled to specified thickness | It does not need to have a shiny surface |
NO.2D | Silvery white | After cold rolling, heat treatment and pickling are carried out | Common material, deep drawing wood |
NO.2B | Luster is stronger than No.2D | After NO.2D treatment, a final light cold rolling is carried out on a polishing roll | Common material |
BA | as bright as a sixpence | Non standard, but usually bright annealed surface finish with high surface reflectivity. | Building materials, kitchen utensils |
NO.4 | Grind | A polished surface obtained by grinding with a 150~180# abrasive belt | Building materials, kitchen utensils |
NO.240 | Fine grind | Grind with a 240# strop abrasive belt | kitchen utensils |
NO.320 | Very fine grinding | Grind with a 320# strop abrasive belt | kitchen utensils |
NO.400 | The gloss is close to BA | Grind with 400# polishing wheel | Common material,Building materials, kitchen utensils |
HL | Hairline grinding | It has a large number of whetstone grains when it is used for grain grinding (150~240#) | Buildings, building materials |
NO.8 | Mirror | The mirror is ground with a polishing wheel | Reflector, decorative |
CHEMICAL COMPOSITION | ||||||||||
Classification | Grade | Chemical Composition(%) | ||||||||
C | Si | Mn | P | S | Ni | Cr | Mo | N | ||
Austenitic stainless steel | 201 | ≤0.15 | ≤1.00 | 5.50-7.50 | ≤0.060 | ≤0.030 | 3.50-5.50 | 16.00-18.00 | ≤0.25 | |
301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 6.00-8.00 | 16.00-18.00 | |||
304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 8.00-10.50 | 18.00-20.00 | |||
304L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 9.00-13.00 | 18.00-20.00 | |||
305 | ≤0.12 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 10.50-13.00 | 17.00-19.00 | 0.12-0.2 | ||
309S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 12.00-15.00 | 22.00-24.00 | |||
310S | ≤0.08 | ≤1.50 | ≤2.00 | ≤0.045 | ≤0.030 | 19.00-22.00 | 24.00-26.00 | |||
316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 10.00-14.00 | 16.00-18.00 | 2.00-3.00 | ||
316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 12.00-15.00 | 16.00-18.00 | 2.00-3.00 | ||
317 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 12.00-15.00 | 18.00-20.00 | 3.00-4.00 | ||
321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 11.00-15.00 | 17.00-19.00 | |||
Ferritic stainless steel | 409 | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.045 | ≤0.030 | ≤9.00-13.00 | 10.50-11.75 | ||
430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.030 | ≤0.60% | 16.00-18.00 | |||
430LX | ≤0.03 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.030 | 16.00-18.00 | 0.75-1.25 | 0.1-1.0 | ||
Martensitic stainless steel | 410 | ≤0.15 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 11.50-13.50 | |||
410S | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 11.50-13.50 | ||||
420 | 0.16-0.25 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 12.00-14.00 | ||||
440A | 0.60-0.75 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 16.00-18.00 | ||||
duplex stainless steel | 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.040 | ≤0.030 | 4.50-6.50 | 21.00-24.00 | 0.08-0.2 | |
2507 | ≤0.03 | ≤0.80 | ≤1.20 | ≤0.035 | ≤0.020 | 6.00-8.00 | 24.00-26.00 | 3.00-5.00 | 0.24-0.32 |
Stainless steel belt is also called roll belt, roll material, roll plate, plate roll, with a lot of hardness. Stainless steel features:
1. Complete specifications, diverse materials;
2. High dimensional accuracy, up to ±0.1mm;
3. Good surface quality, good brightness;
4. Strong corrosion resistance, high tensile strength and fatigue strength;
5. Stable chemical composition, pure steel, low inclusion content;
6. Good packaging, favorable price;
7. It can be done without calibration.
Suppliers with verified business licenses