After-sales Service: | Life Long Tracking Service |
---|---|
Warranty: | Life Long Tracking Service |
Tile Type: | Colored Steel |
Certification: | CE, ISO |
Condition: | New |
Customized: | Customized |
Customization: |
---|
Suppliers with verified business licenses
Our tee grid making machine it a fully automatic line,even for punching.
For old technology,after forming,workers need to take the readyprofile to do puncing separately.Now our new technology no need to do that.It saves a lot labor.The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will not stop to cut the sheet automatically.
If you want to make suspended ceiling system,three machines are required,one main tee forming machine,one cross tee forming machine and angle tee forming machine.Our Exposed ceiling tee grid machine ,it is composed of manual decoiler,main forming part,punching system,collecting table.Three common tee grid design,flat one,slotted one and black out one.
TECHNICAL PARAMETERS
2.Main machine for Ceiling Tee Grid Forming Machine
Size: 3500х800х1400mm
Weight : 3 tons
Voltage:380V/50HZ3Phase (as customer`s request)
Rollerfixer : Guide column
Frame:middle plate welded, memorial arch frame type
Frame thickness:25mm
Drive mode: gear box
Material rollers: GCr12MoV
Material of shafts: 45# steel with tempering
Diameter of shafts: φ40mm
Number of rollers : 16 rollers
Main power: 3kw
Speed: 10-50m/min
Cyclical planetary gear speed reducer)
Notice: different sizes will be produced by adjusting the spacers by hand.
(1). Suitable material to process: PPGI coil and GI coil; |
(2). Thickness of the plate: 0.3-0.4mm; |
(3). Productivity: 15-30m/min; |
(4). Roller stations: 16 rows; |
(5). Diameter of the shaft: φ40mm; |
(6). Material of roller: Cr12; |
(7). Material of main shaft: 45# steel with grinding process and then slack quench processed; |
(8). Frame: square box structure welded with steel; |
(9). Wall structure: independent style and thickness 30mm; |
(10). Main motor brand: Li Chao from Shanghai; |
(11). Main motor power: 4KW; |
(12). Hydraulic station power: 5.5KW; |
(14). Material of cutter: Cr12MoV with hard treatment; |
(15). Driving mode: gears; |
(16). Punch with mould: two sets, one punch with 0.75KW servo motor feeding ; |
(17). Power supply: 380V, 50HZ, 3 PHASES; or need to be confirmed with the buyer |
(18). Main machine weight: about 3 tons; |
(19). Dimensions of major structure: 6m * 0.9m * 1.0m (approximate). |
(1). Suitable material to process: PPGI coil and GI coil; |
(2). Thickness of the plate: 0.3-0.4mm; |
(3). Productivity: 15-30m/min; |
(4). Roller stations: 16 rows; |
(5). Diameter of the shaft: φ40mm; |
(6). Material of roller: Cr12; |
(7). Material of main shaft: 45# steel with grinding process and then slack quench processed; |
(8). Frame: square box structure welded with steel; |
(9). Wall structure: independent style and thickness 30mm; |
(10). Main motor brand: Li Chao from Shanghai; |
(11). Main motor power: 4KW; |
(12). Hydraulic station power: 5.5KW with energy storage tank and hydraulic oil cooler; |
(14). Material of cutter: Cr12MoV with hard treatment; |
(15). Driving mode: gears; |
(16). Automatic puch device: one set; |
(17). Power supply: 380V, 50HZ, 3 PHASES;or need to be confirmed with the buyer |
(18). Main machine weight: about 3 tons; |
(19). Dimensions of major structure: 8m * 0.9m * 1.0m (approximate). |
Suppliers with verified business licenses