Cast Iron& Ductile Iron UCT201-212 Take-up Bearing Units Conveyor Applications

TANN Mounted Bearing Units | Complete Series For Seletion

The TANN mounted bearing unit is a bearing unit which combines the spherical outside surface ball bearing, seal, and a housing of high-grade cast iron or pressed steel. It features a variety of structure patterns, and is suitable for appliation under tough conditions. 

Quality Materials| Chrome Steel, Stainless Steel, Sheet Steel, Plastic, Gray Cast Iron, Ductile Cast Iron

The performance and reliability of rolling bearings are greatly affected by the materials which the bearing components are made from TANN  bearing rings and balls are made of high quality of Gcr15 (100cr6) - type of bearing steel and the chemical composition is shown as below.
 

Most of ball-bearing cages are made of cold-rolled steel sheet. And for some bearing types and special applications, cages are made of glass fiber reinforced nylon 66 plastic, phenolic or machined brass.

The material of bearing housings is gray or ductile cast iron, housings can also be made of pressed steel, stainless steel, or engineering plastic for special purposes, depending on application and or customer's requirement. 

Mechanical properties of housing material:

TANN uses gray cast iron as the standard material for cast iron housings. Among metallic material cast iron has a high damping capacity, which is an ideal characteristic for mechanical components. This means cast iron, exhibits superior performance when absorbing vibration, compared with other materials. Additionally cast iron is suitable for high temperatures of up to 300C°.

Product Features

KEY WORDS	DESCRIPTIONS
MAINTENANCE	Low maintenance due to its self-aligning capabilities
LUBRICATION	Fast and easy re-lubrication due to a built-in lubrication hole
SELF-ALIGNMENT	Rational self-alignment
LOAD	Larger load carrying capacity, relubricable, longer service life of the units
SEAL	Efficient, sealing ability of the units with covers is perfect
HOUSE	Durable housing, provide maximum rigidity against deformation for any condition
LOCK	Easy and positive locking to shaft
HEAT-TREATMENT	Special heat-treatment on bearing inner ring prevent causing cracking
DEVICE	Unique device to prevent bearing outer ring rotation
INTERCHANGEABILITY	Complete interchangeability between bearing and housing
INSTALLATION	Easy installation
POSITION	Easy positioning for mounting

Manufacturing Processing

# Raw Material
1. Years of hands-on experience result in perfect raw material ratios.
2. Toughness of the cast iron material due to the mixing of different trace elements. 

# Housing Molds
1. International standard molds are available for interchangeable convenience.
2. Independent mold development team can provide customized mold service according to the OEM requirements. 

# Hollow Model
1. Regularity of sand pattern facilitates batch manufacturing.
2. The location of factory brings lower temperature difference, which slows down the condensation of molten iron and improves the quality. 

# Deburring
1. The housings removed from the sand hollow model are processed by an initial cleaning and polishing.
2. The clean surface and removed burrs reduce the burden of machining in the following process, achieving the best machinable condition.

# Turning and Drilling
1. Multi-project handling turning equipment helps to increase the efficiency of turning.
2. Machining parameters according to international standards guarantee the interchangeability of mating surfaces and mounting holes.

# Painting
1. Spraying can help the painting color adhere more evenly to the housing surface than dipping.
2. The complete conveyor line ensures uniformity and stability of the color of the same batch of housings.

# Housing Display
1. Uniform colors, flat surfaces and precise mounting holes are what we look for in housing's.
2. The metal surface of the seat is cleaned and stabilized with anti-rust oil.

# Packing
1. Customized inner and outer packaging helps clients achieve brand promotion.
2. Designed composite pallets have a more stable structure, ensuring the safety of goods in transit.

Qualtiy Control

 

FAQ

 

# Experience
A: We have been working in bearings for 16 years and in technical positions for 12 years.

# Standard or Nonstandard
A:These are standard size bearing.
B:We can order non-standard bearings with drawing or detaileddimensions.

#  Integrated Roles
A: We have had our own bearing production plant for 12 years and ourown sales team for 16 years, which have gathered a comprehensiveproduct range with a complete supply-chain system for the one-stopshop service for customers.

# MOQ
A: 10PCS, 100PCS,1000PCs accept for the standard size with different prices.
lf you purchase the Non-Standard for Bearing the MOQ is 3000pcs.

# Sample
A:Yes, free samples for testing before mass production can be offered.

# OEM Serive
A:Yes, OEM is accepted and we can customize for you according tosample or drawing.

# Stock
A:Yes, most of the bearings showing on are available in stock.
B:But when we are in peak season,stocks consumed, so we need timefor production.

# Delivery Lead time
lnstock beairngs: 10-15 days
Out of stock bearings: 30-45 days

# Product Range
A: main products are ball bearing, pillow block bearing , plastic bearing,ceramic bearing, and industrial tools,etc, as per customers' drawingsor samples.

# Fields We Cover
A: We supplies different precision level bearings for differenctoperation area, the main areas we supply are bicycle,automotiveaftermarket, agriculture, machine tool, and general industry.