Product Description
Film detail |
Type |
Hollow fiber |
Film making process |
NIPS(wet process) |
Membrane material |
PVDF |
nominal bore |
0.03um |
Membrane inner/outer diameter |
0.7/1.4mm |
Component specifications |
Housing material |
U-PVC |
Pouring materials |
epoxy resin |
Connection port standard |
DN50 |
Effective membrane area |
77m2 |
Full water weight |
100KG |
Transport weight |
65KG |
Package size |
190X28X29CM |
Product Name: Outside in Hollow Fiber membrane 0660 PVDF UF membrane at the Industrial Wastewater Purification Plant
Detailed Photos
Product Parameters
Pre-filter |
50-150um |
Operation mode |
Internal pressure operation |
molecular cut off |
100000 Daltons |
Operation pressure |
0.02~0.2MPa |
Max inlet pressure |
0.3MPa |
Continuous operation pH range |
3~9 |
Max operating temperature |
40ºC |
Influent turbidity |
≤20NTU |
Backwash frequency |
15-60min/time |
Backwash pressure |
≤0.2MPa |
Backwash flow rate |
100~250L/H.m² |
Component Designed flux |
40~120L/m²/H |
Component Designed water output |
200-400LPH |
Turbidity of produced water |
<0.1NTU |
Water pollution density index (SDI15) |
<3 |
Removing Escherichia coli |
>6log |
Removing Virus |
>4log |
Company Profile
Our Advantages
PVDF material, resistant to chemical cleaning, with superior antioxidant performance |
High filtration accuracy, nominal pore size 0.03um, uniform pore size distribution |
Membrane silk has high strength and good toughness (membrane silk elongation exceeds 100%) |
Low pressure and high flux (can meet the design flow rate at a very low transmembrane pressure difference) |
Good chemical stability (the performance of the membrane module remains unchanged after 50 acid and alkali chemical cleaning) |
Strong anti pollution ability (extended cleaning cycle by 30%, good membrane flux recovery effect) |
Externally pressurized use, with strong pollution capacity and wider inlet water quality |
The standard accessory connection method greatly improves the convenience of component installation |