After-sales Service: | Normal Industry Service |
---|---|
Power Supply: | 220V/380V |
Certification: | Bureau of Metrology Third Party Report |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product application scope
Used to test and determine the parameters and performance of electrical and electronic, home appliances, vehicles, aerospace, battery cell phones and tablets and other products or materials after temperature environment changes under high temperature, low temperature, hot and humid environment or constant test.
Performance: refers to air-cooled at room temperature 20ºC, no load
1, temperature range: -40ºC ~ 150ºC
2, humidity range: 20 ~ 98%RH
3. Control stability:
1) Temperature :±0.5ºC
2) Humidity :±2.5%RH
4, distribution uniformity:
1) Temperature :±2.0ºC
2) Humidity :±3.0%RH
5, heating time: from -20ºC to 100ºC takes about 50 minutes
6, cooling time: from 20 ° C to -40 ° C takes about 60 minutes
7, temperature and humidity control range
Second, structure and material
1. Inner box size: H500×W400×D500 (MM)
2, inner box material: SUS#304 mirror stainless steel plate
3, outer box material: SUS#304 sand grain stainless steel plate
4, temperature protection layer: high-density rigid PU foam and 24K glass wool
5, machine foot: the bottom of the furnace is equipped with 4 movable wheels, 4 flat water feet
6. Box door:
1) Single door, open left, handle on right,
2) Window 280×300×35mm multi-layer high definition electric heating defogging tempered glass
3) The box is equipped with 11W imported fluorescent lamp
7. Fan: 60W lengthened shaft motor with two sets of multi-wing wind wheel
8, heater: fin type heating pipe type stainless steel electric heater
9, furnace accessories: adjustable layer format 2 sets, with stainless steel storage rack 2
10. Test hole: 1 ø50mm hole on the left side of the fuselage, with 1 stainless steel cover
11. Control panel
1) Lighting type pressure button switch 2 sets
2) Temperature and humidity controller 1
3) 1 main power switch
4) R232 computer interface 1
12. Water tank
1) 24L stainless steel water tank with water in front
2) Automatic water pump 1 group, automatically supply water from the water tank to humidification and wet bulb water
3) Water shortage alarm device 1 group
Three, freezing system
1) The compressor adopts the original French imported "Taikang brand" fully enclosed iron warrior
2) Environmentally friendly snow species
3) Fin type condenser with cooling fan
4) Evaporator fin multi-stage automatic load capacity adjustment
5) Other accessories: imported desiccant, oil separator, pressure protection switch, snow flow window and other freezing accessories
4. Control system
1, control mode: balanced temperature and humidity control system (BTHC), with P.I.D control SSR, so that the heating and humidification of the system is equal to the heat and humidity loss, so it can work stably for a long time.
2, temperature and humidity controller: the original Korean import "TEMI 880" English and Chinese interface, data and data screen display chat mode temperature and humidity controller, single point and programmable control, screen backlight can be adjusted.
1) Resolution: 0.01ºC, 0.01%R.H
2) Temperature range: -70ºC ~ +200ºC
3) Humidity range :10% ~ 99.9%R.H
4) Number of program segments: 120 groups of programs 1200 memory
5) Temperature, humidity and time can be set at the same time in each section, and 999 times can be repeated
6) The program runs with standby, jump segment, hold and other functions
7) With fixed timing stop and program end functions
It has the function of booking start and stop and fault prompt
Safety protection device:
1. Zero crossing thyristor power controller SSR 2 group
2. Air fire guard on switch
3. Water protection switch 1 group
4. Compressor high pressure protection switch
5. Compressor overload protection switch
6. Compressor overcurrent protection switch
Seven. Line protection wire and sheath type terminals
8.16A 3P Overload Protection 1 device
9. Import 1P6A overload protection 1
10. Water shortage protection device 1 group
6. Use environment:
1, performance guarantee environment: 5 ~ 30ºC
Vii. Others:
Standard nonwoven 5 pieces
8. Power supply: 3ø220 VAC 10KW
More details show
Suppliers with verified business licenses