Basic Info.
Rotationl Speed
13.8-38r/Min
Feeding Particle Size
≤20
Discharge Size (mm)
0.075-0.4mm
Installation
Under Our Engineer′s Guide
Specification
Ф 900× 1800-Ф 3600× 6000
Product Description
Intermittent ball mill is basically the same as other ball mills, and it is the key equipment for crushing the material after being broken. Intermittent ball mill has been widely used, mainly used in cement, silicate products, new building materials, refractory materials, chemical fertilizer, black and non-ferrous metal processing, such as glass ceramics industry production of all kinds of ores and other materials for grinding of dry or wet grinding.
Working principle
Intermittent ball mill is a horizontal rotating device, outer gear, two warehouses, lattice type energy-saving ball mill. Material from the feed devicefeedair evenly into the mill screw shaft first warehouse, the warehouse has stepped lining board or corrugated liner, built in different specifications of steel tube to rotate the ball to a certain height, the centrifugal force generated after the fall, pounding and abrasivematerials. After the raw material reaches rough grinding in the first bin, it enters the second bin through a single partition board. The flat plate is inlaid with steel balls inside it, and the material is further grinded. The powder is discharged through the discharging grate plate so as to finish the grinding operation.
Structure composition
1.Intermittent ball mill is composed of feeding part, discharging part, rotating part, transmission part (reducer, small transmission gear, motor, electric control) and other main parts. The hollow shaft is made of cast steel, the inner lining can be replaced, and the large rotating gear is machined by casting hobbing, and the inner lining of the cylinder is lined with a wear-resistant lining board, which has good wear resistance. The machine runs smoothly and the work is reliable.
2.Feeding device: intermittent ball mill feeding device is composed of a feed chute and feed screw cylinder, feeding chute is arranged in the lining board
3.Main bearing of intermittent ball mill: main bearing adopts sliding bearing. The mill is supported on the two main bearings through the hollow shaft, and the weight of the slewing part is all borne by the main bearing
4.The rotary device of the intermittent ball mill is composed of a cylinder body and a grinding head welded by a high quality carbon steel plate. The cylinder is the main part of the mill, and it is one of the main parts of the mill. The material is grinded and grinded into the fine powder in the cylinder by the grinding body
5.The transmission device of intermittent ball mill is mainly composed of motor, drive shaft, reducer, shaft coupling and accessory equipment. The transmission mode is edge transmission, that is, the pinion on the transmission shaft is meshed with the big gear fixed at the tail of the cylinder to drive the mill to rotate
Characteristics
1.The intermittent ball mill motor is started by self coupling decompression, and the starting current is reduced. The structure of the motor is divided into integral type and independent type.
2.According to the specific gravity, hardness and yield, the user can select the appropriate type, liner and medium
3.The product has the advantages of less investment, energy saving, energy saving, novel structure, simple operation, safe use, stable and reliable performance, etc., and is suitable for mixing and grinding operations of ordinary and special materials
Applicable materials
Diamond | calcium carbonate | water slag | cement | Algae soil | quartzite | marble | sodium feldspar | medical stone | chromium ore |
Titanium | corundum | basalt | quartz | sand | bentonite | ore | calcite | kyanite | mica |
Diabase | graphite | bauxite | concrete | manganese ore | dolomite | gangue | iron ore | fluorite | fly ash |
Granite | coke | iron oxide | limestone | zircon | barite | molybdenum ore | Silver Ore | Phosphorus stone | Sulfate stone |
Slate | slag | activated carbon | kaolinite | johnstonotite | Fluorine ore | Pyrophillite | Copper ore | feldspar | |
Technical parameter
Specification model | Cylinder speed (r/min) | Loading ball (t) | Feeding particle size (mm) | Discharge size (mm) | Capacity (t/h) | Motor power (kw) | Total weight (t) |
Ф900×1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 22 |
Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 56 |
Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 54.5 |
Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 61 |
Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62.5 |
Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 58 |
Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 72 |
Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 22-80 | 380 | 95 |
Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 26-90 | 480 | 102 |
Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | According to process conditions | 630 | 149 |
Ф3600×4500 | 17 | 90 | ≤25 | 0.074-0.4 | According to process conditions | 850 | 169 |
Ф3600×6000 | 17 | 110 | ≤25 | 0.074-0.4 | According to process conditions | 1250 | 198 |
Ф3600×8500 | 18 | 131 | ≤25 | 0.074-0.4 | 45.8-256 | 1800 | 260 |
Remarks
The above model is the product data, the user can order special specification equipment according to the material category, special requirements, production and other conditions.
Address:
Room 601 Huaxia International, Zhangdian District, Zibo, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Transportation
Company Introduction:
The company is mainly engaged in:
1. Mine machinery and equipment: Supply in different types of kilns, ball mills, dryers, rotary kilns, crushers, concrete mixing stations, hoists and other mechanical equipment.
2. Environmental protection equipment: Bag dedusting equipment, wet electrostatic dedusting equipment, flue gas desulfurization equipment, flue gas denitrification equipment.
3. Clean Gas Equipment: Gas Generator.
4. Other mechanical equipment: Rotor scale, belt scale, various measuring equipment, various control cabinets, small and small gears, fans of different specifications and so on.
Why did you choose us?
1. The company has gathered a group of high-quality technical experts, trained and trained a professional team, and established a set of automated operation management system.
2. The company adheres to the management principle of "quality first, service first, continuous improvement, innovation to meet customers", and takes "zero defects, zero complaints" as the quality goal.
3. The same commodity ratio price, the same price ratio quality, the same quality ratio service, the same service ratio timeliness and effectiveness.
4. Always take "serving customers wholeheartedly" as the action plan.
5. We are pleased to receive your inquiry and will reply to you as soon as possible.