Feature: | Plastics |
---|---|
CAS No.: | 9002-81-7 |
Formula: | C22h42o9si |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 04-002 POM copolymer Easy flowing Injection molding type, similar to C 13021 but modified for sliding combinations HOSTAFORM/HOSTAFORM; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: favourite applications with sliding combinations HOSTAFORM/HOSTAFORM, e.g. for smooth-running zippers, also sliding combinations with other plastics are possible. FMVSS = Federal Motor Vehicle Safety Standard (USA) | ||||
General | ||||
Form | Resin Pellets | |||
Chemical Resistant Hydrolysis Resistance |
Fuel Resistant Solvent Resistant |
Excellent Processability Alkali Resistant | ||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.41 g/cm³ | ISO 1183 | ||
Melt Volume-Flow Rate, MVR(190 °C;2.16 kg) | 13 cm³/10 min | ISO 1133 | ||
Molding Shrinkage, Across Flow | 1.8 % | ISO 294-4 | ||
Molding Shrinkage, Flow | 2.0 % | ISO 294-4 | ||
Water Absorption, Saturation(23 °C) | 0.65 % | ISO 62 | ||
Water Absorption, Equilibrium(50% RH;23 °C) | 0.20 % | ISO 62 | ||
Ball Indentation Hardness(30s) | 143 MPa | ISO 2039-1 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Modulus | 2900 MPa | ISO 527-2/1A | ||
Tensile Stress, Yield | 65.0 MPa | ISO 527-2/1A/50 | ||
Tensile Strain, Yield | 9.0 % | ISO 527-2/1A/50 | ||
Nominal Tensile Strain at Break | 28 % | ISO 527-2/1A/50 | ||
Tensile creep modulus | ISO 899-1 | |||
1 hr | 2500 MPa | |||
1000 hr | 1300 MPa | |||
Flexural Modulus(23 °C) | 2800 MPa | ISO 178 | ||
Charpy Notched Impact Strength | ISO 179 1eA | |||
-30 °C | 6.0 kJ/m² | |||
23 °C | 6.5 kJ/m² | |||
Charpy Unnotched Impact Strength | ISO 179 1eU | |||
-30 °C | 200 kJ/m² | |||
23 °C | 200 kJ/m² |
Thermal | Nominal Value | Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) | 102 °C | ISO 75-2/A |
Vicat Softening Temperature | 151 °C | ISO 306/B50 |
Melting Point(10 °C/min) | 166 °C | ISO 11357-3 |
CLTE, Flow | 1.1E-4 cm/cm/°C | ISO 11359-2 |
Electrical | Nominal Value | Test Method |
Surface Resistivity | 1.0E+14 ohms | IEC 60093 |
Volume Resistivity | 1.0e+14 ohms·cm | IEC 60093 |
Electric Strength | 35 kV/mm | IEC 60243-1 |
Relative Permittivity 100 Hz 1000000 Hz |
4.00 4.00 |
IEC 60250 |
Dissipation Factor 100 Hz 1000000 Hz |
2.0E-3 5.0E-3 |
IEC 60250 |
Comparative Tracking Index | 600 V | IEC 60112 |
Processing | Nominal Value | |
Drying Temperature<Injection> | 100 - 120 °C | |
Drying Time<Injection> | 3.0 - 4.0 hr | |
Suggested Max Moisture<Injection> | 0.15 % | |
Hopper Temperature<Injection> | 20 - 30 °C | |
Rear Temperature<Injection> | 170 - 180 °C | |
Middle Temperature<injection> | 180 - 190 °C | |
Front Temperature<Injection> | 190 - 200 °C | |
Nozzle Temperature<Injection> | 190 - 210 °C | |
Processing Temp, Melt<Injection> | 190 - 210 °C | |
Mold Temperature<Injection> | 80 - 120 °C | |
Injection Rate<Injection> | Slow | |
Back Pressure<Injection> | < 2.00 MPa | |
Feeding Zone Temperature<Injection> | 60 - 80 °C | |
Zone4 temperature<Injection> | 190 - 210 °C | |
Hot Runner Temperature<Injection> | 190 - 210 °C |
High quality PC outdoor uses high UV resistant materials for LED lights monitoring lights security lights With almost 20 years in the modified engineering plastics,Forever Plastics is a high-tech manufacture integrating R&D, production and sales of high-performance resin or polymer ,including PC,PP,PA6,PA66, PBT,PET, PC/ABS, PC/PBT, PC/PET alloy compounds,TPE,TPU, PE for rotomolding with the property of the flame retardant, glass fiber reinforced, high glossy, UV resistance.....with the annual output value of USD 65 million in 2021Our customers are Philips,Osram,Cree,Schneider,Siemens,etc. for years in the electrical&electronics components, Automotive parts, House appliance,LED lights.....
1.Are you the manufacture or trader?
"-We are the manufacture actually.
In order to export we register as the trader.
You are warmly welcome to visit our factory.
2. How can I check the quallty of the raw materlals?
"-We will provide you the sample materials for testing.
3. What is your lead tlme?
"-Usually we can ship within 7-15 days
4.What Is your payment term?
"-T/TLC.This is negotiable.
5.What Is the shipping method?
"-It could be shipped by seaby air or byexpress(EMSUPSDHLTNTFEDEX and ect).
6.How do you make our business long-term and good relationship?
"- We are looking partners all over the world.
If you are interested,please kindly contact with us.