|
Model |
SEM917 |
Operating Weight |
|
Standard |
13,500 kg / 13,820 kg (With ROPS) |
With Front & Rear Counterweight |
13,780 kg / 14,100 kg (With ROPS) |
With Front Blade |
14,130 kg / 14,450 kg (With ROPS) |
With Ripper+Front Blade |
14,410 kg / 14,730 kg (With ROPS) |
Operating Specifications |
|
Top Speed, Forward |
40 kph |
Top Speed, Reverse |
29 kph |
Min. Turning Radius |
7,300 mm |
Articulation Angle, Left /Right |
20 ° |
Gradeability |
30 ° |
Wheelbase |
5,830 mm |
Travel Speed, Forward |
5.3 / 8.2 / 13.3 / 20.3 / 29 / 40 kph |
Travel Speed, Reverse |
5.3 / 13.3 / 29 kph |
Drawbar Pull |
78 kN |
Engine |
|
Engine Manufacturer |
SDEC (ShangChai Diesel) |
Engine Model |
SC7H170. 1G2B |
Rated Power |
125 @ 2,200 kN @ RPM |
Max. Torque |
750 @ 1,400 Nm @ RPM |
Emission |
Tier 2 |
Displacement |
6.5 L |
Bore |
105 mm |
Stroke |
124 mm |
Number of Cylinders |
6 |
Transmission |
|
Brand / Manufacturer |
Advance / Hang-Chi |
Type |
Converter, Powershift |
Powershift Pressure |
1.3 ~ 1.7 Mpa |
Forward / Reverse Gears |
6 / 3 |
Parking Brake |
Spring Actuated, Air Released |
Tandem Axle |
|
Brand / Manufacturer |
SEM / Caterpill-ar |
Model |
ST18 |
Differential |
No-Spin |
Service Brake |
Caliper-Disc |
Secondary |
Dual Circuit |
Oscillation Front Up |
15° |
Oscillation Front Down |
25° |
Front Axle |
|
Ground Clearance |
640 mm |
Wheel Lean, Left / Right |
±18° |
Max. Oscillation |
±16° |
Steering Range, Left / Right |
±45° |
Hydraulic System |
|
Circuit Type |
Loading Sensing, PPPC |
Pump Type |
Variable Piston |
Max. Pump Output |
162.8 L / min |
Max. System Pressure |
22 MPa |
Standby Pressure |
2.0~2.2 MPa |
Moldboard |
|
Blade Width, Standard |
3,669 (12')mm (Ft) |
Blade Width, Optional |
3,972 (13') mm (Ft) |
Moldboard Height |
610 mm |
Moldboard Thickness |
20 mm |
Throat Clearance |
112 mm |
Float Function |
Optional |
Moldboard Sideshift, LH |
647 mm |
Moldboard Sideshift, RH |
528 mm |
Circle Centershift, LH |
512 mm |
Circle Centershift, RH |
663 mm |
Max. Blade Position Angle |
90 ° |
Blade Tip, Forward |
40 ° |
Blade Tip, Backward |
5 ° |
Blade Cutting Angle |
24-69 ° |
Max. Shoulder Reach outside of Tires, LH |
1,748 mm |
Max. Shoulder Reach outside of Tires, RH |
1,912 mm |
Max. Lift above Ground |
460 mm |
Max. Cutting Depth |
725 mm |
Service Refill Capacity |
|
Fuel Tank |
218 L |
Engine Oil |
17.5 L |
Coolant |
37 L |
Transmission |
17 L |
Differential Case |
27 L |
Tandem Case, Each Side |
50 L |
Circle Drive, Non Slip Clutch |
2 L |
Circle Drive, With Slip Clutch |
7 L |
Hydraulic Oil Tank |
55 L |
Main Optional Equipments |
|
Mid Mounted Scarifier(MMS) / MMS Ready |
Circle Saver |
Front Counterweight, 1000kg |
Rear Counterweight, 600kg |
Blade Float |
Cold Start |
Elec-Hydraulic Pin Puller |
High Profile ROPS Cab |
Hydraulic Blade Tip |
Circle Drive with Slop Clutch |
Front Blade / Front Blade Ready |
Rear Ripper / Rear Ripper Ready |
Rear Fender |