| Feature: | Oxidative Degradable |
|---|---|
| CAS No.: | 32131-17-2 |
| Formula: | (C12h22n2o2)N |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier PA66 30% glass fiber Typical applications include such as lamp socket housings cooling fans
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
| Product Description | ||||||
| A3EG6 is a 30% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability. Applications Typical applications include such as lamp socket housings, cooling fans, insulating profiles for aluminium window frames, and electrical insulation parts. |
||||||
| General | ||||||
| Form | Resin Pellets | |||||
| Filler | ||||||
Feature |
Good Dimensional Ec 1907/2006 (Reach) |
Good Hardness | Fuel Resistant | |||
| UL Yellow Card E41871-233730 | ||||||
Uses |
Electronic Insulation Mechanical Parts | Electrical Engineering Housing | ||||
| Physical | Nominal Value | Test Method | ||||
| Density, dry | 1.36 g/cm³ | ASTM D792;ISO 1183 | ||||
| Dry: Melt Volume-Flow Rate, MVR(275 °C;5 kg) | 40 cm³/10 min | ISO 1133 | ||||
| Dry: Molding Shrinkage - Flow(3.18 mm) | 0.30 % | No Standard | ||||
| Dry: Water Absorption, Saturation | ||||||
| 5.5 % | ASTM D570 | |||||
| 23 °C | 5.5 % | ISO 62 | ||||
| Dry: Water Absorption, Equilibrium | ||||||
| 50% RH | 1.7 % | ASTM D570 | ||||
| 50% RH;23 °C | 1.7 % | ISO 62 | ||||
| Mechanical | Nominal Value | Test Method | ||||
| Dry: Tensile Modulus(23 °C) | 10000 MPa | ISO 527-2 | ||||
| Condition: Tensile Modulus(23 °C) | 7200 MPa | ISO 527-2 | ||||
| Dry: Tensile Strength, Break 23 °C -40 °C 23 °C |
186 MPa 238 MPa 190 MPa |
ASTM D638 ISO 527-2 ISO 527-2 |
||||
| Condition: Tensile Strength, Break -40 °C 23 °C |
227 MPa 130 MPa |
ISO 527-2 | ||||
| Dry: Tensile Elongation, Break 23 °C -40 °C 23 °C |
3.0 % 3.2 % 3.0 % |
ASTM D638 ISO 527-2 ISO 527-2 |
||||
| Condition: Tensile Elongation, Break -40 °C 23 °C |
3.0 % 5.0 % |
ISO 527-2 | ||||
| Dry: Flexural Modulus(23 °C) | 8600 MPa | ISO 178 | ||||
| Condition: Flexural Modulus(23 °C) | 6500 MPa | ISO 178 | ||||
| Dry: Flexural Stress(23 °C) | 280 MPa | ISO 178 | ||||
| Condition: Flexural Stress(23 °C) | 210 MPa | ISO 178 | ||||
| Dry: Charpy Notched Impact Strength -30 °C 23 °C |
11 kJ/m² 13 kJ/m² |
ISO 179 | ||||
| Condition: Charpy Notched Impact Strength(23 °C) | 22 kJ/m² | ISO 179 | ||||
| Dry: Charpy Unnotched Impact Strength -30 °C 23 °C |
70 kJ/m² 85 kJ/m² |
ISO 179 | ||||
| Condition: Charpy Unnotched Impact Strength(23 °C) | 100 kJ/m² | ISO 179 | ||||
| Dry: Notched Izod Impact -40 °C 23 °C |
91 J/m 110 J/m |
ASTM D256 | ||||
| Thermal | Nominal Value | Test Method | ||||
| Dry: Deflection Temperature Under Load, Unannealed 0.45 MPa 1.8 MPa |
250 °C 250 °C |
ISO 75-2/B;ASTM D648 ISO 75-2/A;ASTM D648 |
||||
| Dry: Peak Melting Temperature | 260 °C | ASTM D3418;ISO 3146 | ||||
| Dry: CLTE, Flow | 1.0E-5 cm/cm/°C 2.5E-5 cm/cm/°C |
ASTM E831 No Standard |
||||
| Dry: CLTE, Transverse | 6.5E-5 cm/cm/°C | No Standard | ||||
| Dry: RTI Elec 0.75 mm 1.5 mm 3 mm 6 mm |
120 °C 120 °C 120 °C 120 °C |
UL 746 | ||||
| Dry: RTI Imp 1.5 mm 3 mm 6 mm |
120 °C 120 °C 120 °C |
UL 746 | ||||
| Dry: RTI Str 1.5 mm 3 mm 6 mm |
130 °C 130 °C 130 °C |
UL 746 | ||||
| Dry: Flame Rating 1.5 mm 3 mm 6 mm |
HB HB HB |
UL 94 | ||||
| Electrical Nominal Value Test Method | ||||||
| Dry: Volume Resistivity | ||||||
| 1.5 mm 1.0e+15 ohms ·cm ASTM D257 | ||||||
| 1.0e+15 ohms ·cm IEC 60093 | ||||||
| Condition: Volume resistivity | ||||||
| 1.5 mm 1.0E+12 ohms ·cm ASTM D257 | ||||||
| 1.0E+12 ohms ·cm IEC 60093 | ||||||
| Dry: Dielectric Constant(1.0e+6 Hz) 3.50 IEC 60250 | ||||||
| Condition: Dielectric Constant(1.0e+6 Hz) 5.60 IEC 60250 | ||||||
| Dry: Dissipation Factor IEC 60250 | ||||||
| 100 Hz 0.014 | ||||||
| 1.0e+6 Hz 0.014 | ||||||
| Condition: Dissipation factor IEC 60250 | ||||||
| 100 Hz 0.23 | ||||||
| 1.0e+6 Hz 0.16 | ||||||
| Dry: Comparative Tracking Index 550 V IEC 60112 | ||||||
| Condition: Comparative Tracking Index 550 V IEC 60112 | ||||||
| Processing Nominal Value | ||||||
| Drying Temperature<Injection> 80 °C | ||||||
| Drying Time<Injection> 2.0 - 4.0 hr | ||||||
| Suggested Max Moisture<Injection> 0.15 % | ||||||
| Processing Temp, Melt<Injection> 280 - 305 °C | ||||||
| Mold Temperature<Injection> 80 - 90 °C | ||||||
| Injection Pressure<Injection> 3.50 - 12.5 MPa | ||||||
| Injection Rate<Injection> Fast | ||||||
Forever Co.,Ltd
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}