Electronic Thermostat:
The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices.
The thermostat registers the surrounding air and can switch both, inductive and resistive loads, via relay with change-over contact.
The LED integrated in the adjustment knob is lit when the NC is closed. (e.g. when a connected heater is operating).
Feature:
***Large setting range
***Small hysteresis
***Status indicator (LED)
***Change-over contact
***Clip fixing
Technical parameters |
|
|
|
|
|
Switch temp diff : |
50%RH (± 3% tolerance) |
|
Reaction time: |
5sec |
|
Contact type: |
Change-over contact(relay) |
|
Service life: |
> 50,000 cycles |
|
Max. Switching capacity: |
240V, 8 (1.6) A;120V, 8 (1.6) A; 100WDC at24VDC |
|
EMC: |
acc.to EN55014-1-2,EN6100-3-2,EN61000-3-3 |
|
Optical indicator: |
LED |
|
Connection: |
5-pole terminal with 2.5mm² stranded wire |
|
Mount |
35mm DIN Rail, |
|
Case Material: |
Plastic,UL94V-O, V-O(fire rating) |
|
Dimensions: |
64.5 x 42 x 38mm |
|
Weight: |
approx. 70g |
|
Protection Type |
IP20 |
|
Fitting Position: |
unlimited |
|
Max. Storage humidity |
max. 90 % RH |
|
Operating/Storage Temperature: |
0°C to +60°C(32°F to+140°F);
-20°C to +70°C(-4°F to+158°F) |
|
Model No. |
Operating voltage |
Setting range |
TX012-EFR-00 |
230VAC, 50/60Hz |
40 to 90% RH |
TX012-EFR-01 |
230VAC, 50/60Hz |
65RH pre-set |
TX012-EFR-90 |
120VAC, 50/60Hz |
40 to 90% RH |
TX012-EFR-91 |
120VAC, 50/60Hz |
65RH pre-set |
Related Products