Alumina Bauxite Raw Material Silica Mullite Brick Refractory Products
The Description:
Silicon Mullite brick, there is "wear-resistant brick" another name, also known as GM high wear-resistant brick, high wear-resistant coefficient, in terms of its phase composition is silicon carbide - mullite products, so referred to as silicon Mo brick. Silicon Mo brick has high temperature resistance, corrosion resistance, wear resistance, this name is mostly in the building materials industry, other industries are generally called high aluminum silicon carbide brick, aluminum oxide - silicon carbide brick.
In recent years, the application of silica brick in cement rotary kiln has been rapidly developed, especially the new dry process kiln and the large-scale kiln, the speed of the kiln, the thermal stress strength in the kiln has been greatly improved, and the material and physical and chemical properties of the refractory have been put forward new and higher requirements. Therefore, in addition to the use of magnesia-aluminum spinel and magnesia-iron spinel in the sintering belt of cement rotary kiln under the protection of the kiln skin, the effect of secondary firing belt, transition belt and cooling belt is significantly better than that of other products after the use of silica brick.
Physical and Chemcial Index of Alumina Bauxite Raw Material Silica Mullte Brick
| Items |
SM-65 |
SM-63 |
SM60 |
| Al2O3 % ≥ |
65 |
63 |
60 |
| Fe2O3 % ≤ |
2.0 |
2.0 |
2.0 |
| Refractoriness ºC ≥ |
1790 |
1790 |
1790 |
| RUL ºC ≥ |
1550 |
1650 |
1680 |
| % P.L.C 1450ºC×2h |
0-0.2 |
0-0.2 |
0-0.2 |
| Apparent porosity % ≤ |
20 |
20 |
21 |
| Cold crushing strength Mpa ≥ |
80 |
90 |
95 |
Product feature:
Compared with other refractory products, silica mullite brick has:
(1) The product has dense structure and good wear resistance. The main crystalline phase of silica brick is composed of high hardness mineral corundum (Mohs hardness 9.0 ~ 9.2), silicon carbide (Mohs hardness 9.0 ~ 9.5), mullite (Mohs hardness 7.0 ~ 7.5). The product structure causes high density, and the bulk density is generally 2.5 ~ 2.7g /cm3. The wear resistance of the refractory at room temperature depends on its strength and the density of the structure, and the material with high strength and density has better wear resistance. The inner lining of cement rotary kiln is chafed by the specifications and dimensions of refractory bricks for a long time, and wear is one of the main reasons for the damage of refractory lining. The density, strength and wear resistance of silica brick are better than those of high alumina brick and magnesia alumina spinel brick. Silica brick in cement rotary kiln secondary firing zone, transition zone and other parts of the use of good wear resistance can be said to play a very important role.
(2) High softening temperature under load, good high temperature performance. The load softening temperature of silica brick is above 1450 ºC, and the high is above 1 650 ºC. Different parts of the use, the brick surface temperature is different, the secondary firing zone, the front transition zone temperature of about 1400 ºC, higher than the firing zone brick surface temperature (because the firing with kiln skin protection, the brick surface temperature is 900 ~ 1 000 ºC). Therefore, the grade GM-1680 can be selected for the secondary firing zone and the front transition zone, and the grade GM-1650 can be selected for the lower temperature parts such as the transition zone and the cooling zone, and the grade GM-1550 can be selected for the decomposition furnace. The load softening temperature index of these bricks is also higher than that of the frequently used high alumina brick and phosphate high alumina brick (load softening temperature of 1 300 ~ 1 520 ºC). Silicon Mo brick because of its dense structure, especially the brick surface to form a continuous SiO2 dense layer, prevent the penetration of molten substances, coupled with Al2O3, S.
Company main products and profiles:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate
){kind=link}
){kind=link}