16inch Wall Fan Descrition:
Product Name: |
16inch wall fan with remote |
Model No: |
FW40-801R |
Voltage: |
220V |
Frequency: |
50Hz |
Power: |
40W |
Motor: |
66*16 Aluminum Motor or Copper Motor |
Grill: |
Line Grill |
Blades: |
3PP blades |
Plug: |
two round Plug |
Color: |
Customized |
Base: |
plastic |
Body: |
New PP material |
ASSEMBLY INSTRUCTIONS
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.