Product Description:
HUBEI FUYA VEHICLE CO.,LTD
I. Details of Japan brand 12cbm 14cbm 12m3 14m3 Compression Garbage Truck I-SUZU Compactor Garbage Truck
[Function introduction of compressed garbage truck]:
1. Compressed garbage truck, also known as after-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is used to dock with the trash can or the trash hopper, and they are combined into a mobile garbage transfer station to realize the pollution-free collection and removal of garbage in one vehicle and multiple buckets. Effectively prevent secondary pollution caused by sc attering and flying during collection and transportation.
2.Garbage compactor Truck (also called Compactor garbage truck,Compression garbage truck, waste compactor truck, garbage compactor truck, trash compactor, refuse collection truck, compactor garbage truck,rubbish truck, bin wagon, dustcart, bin lorry, waste collection vehicle) is designed to collect and transport municipal solid waste.
3. Combined control of gas, electricity and hydraulic pressure. The vehicle's control system comprehensively utilizes the advantages of electric control, air control and hydraulic control. The air control system is controlled by the electronic control system, and the operation of the hydraulic valve group is controlled by the air control system, which improves the reliability and efficiency of use.
4. Advanced electronic control system. Using PLC (programmable controller) integrated control, the control circuit is generated in the PLC, and the logic loop is adopted to ensure that the operation instructions are executed in order, and at the same time to ensure that the operation instructions are interlocked, and only external wiring is connected, which reduces the occurrence of failures, To avoid accidents caused by misoperation and improve reliability;
5. Hydraulic lifting safety circuit. In the hydraulic system of the lift loader, a one-way balance valve is set. The valve not only guarantees the steady lowering of the filler, but also cuts off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not fall suddenly, which improves the safety of use.
5. The compressed garbage truck is in a closed state during compression, filling and transportation. A unique drain valve is installed on the sewage tank, which is reliable in sealing and not easy to be blocked. The optional filler completely covers the feeding port of the filler, eliminating the phenomenon of flying garbage and dust caused by the disturbance of the tail air flow during the transfer process, and the appearance is more beautiful.
Features:
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turn over mechanism,can also choose ground hopper and other kinds of loading mechanism.
Structure Picture Of the I-SUZU Compactor Garbage Truck:
Picture of the I-SUZU 12cbm 14cbm 12m3 14m3 Compactor Garbage Truck:
II. Technical data of Japan brand 12cbm 14cbm 12m3 14m3 Compression Garbage Truck I-SUZU Compactor Garbage Truck
| I SUZU 12cbm 14cbm Compressed Garbage Truck |
|
| Chassis |
|
| Overall dimensions(mm) |
8765×2500×3290(mm) |
|
| Wheel base(mm) |
4500 |
|
| Cabin |
Row half cab |
|
| seat |
2-3 person |
|
| GVW |
16000 |
|
| Driving type |
4×2 |
|
| Steering |
Left drive hand |
|
| Approach/departure angle(°) |
16/20 |
|
| Front /rear overhang(mm) |
1500/2665 |
|
| Axle (front/rear) |
6.3t/13t |
|
| Wheel track(front/rear)(mm) |
2022/1830 |
|
| Tyre size |
295/80R22.5 |
|
| Tyre number |
(6+1)one spare tire |
|
| Max driving speed(km/h) |
90 |
|
| Engine model |
6HK1-TCL |
|
| Engine Fuel type |
Diesel |
|
| Engine power(HP) |
240 |
|
| Displacement |
7790ml |
|
| Engine Type |
4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling |
|
| Emission standard |
Euro 5 Euro 6 |
|
| Gearbox |
6 forwards & 1 reverse |
| Cabin |
|
| Garbage Bin Capcity |
12,000L/14,000L |
|
| Garbage Bin Material |
Q235 carbon steel |
|
| Thickness |
5mm |
|
| Garbage tank Ways of Loading |
Rear Loading with Hang Barrel Type |
|
| Filling time |
8-10s |
|
| Uploading cycling time |
<60s |
|
| Discharging type |
Push and self-discharging |
|
| Discharging time |
30-40S |
|
| Hydraulic system pressure |
16Mpa, 160Bar |
|
| Control type |
Electric control with manual control |
|
| Plat Form |
2 side for 2 worker for foot transport |
|
| Garbage Compact Ratio |
1/5 - 1/2 |
|
| Electric control system |
CAN/PLC |
|
| Dispensing System |
1. Equipped with air-tight dustbin, hydraulic system and operating system.
2. Automatic loading, compressing and discharging, all handled by 1 person.
3. Sewage water collection tank to avoid any pollution during handling.
4. Large Pressure, Good Leakage Proof, Convenient Operation ,Dependable Security.
Electrical Control Panel for compacting system. |
|
|
|
|
|
|
|
|
|
(1) More than 12 years professional manufacturer experience.
(2) CCC ISO9001 agreement
(3) Be designed according to your requirements
(4) Small order can be accepted
(5) We accept 100% inspection, welcome to our factory at any time
(6) 12 month quality guarantee term
We can offer 4x2, 6x4, 8x4, Dongfeng, Sinotruck, FOTON, SHACAN, FAW, CAMC, I SUZU, JMC, JAC with 3m3 to 20m3 garbage compactor trucks.
How does it work?
III. Details of Japan brand 12cbm 14cbm 12m3 14m3 Compression Garbage Truck I-SUZU Compactor Garbage Truck Price
1.Compacting System
Include collecting Panel & Pressing Panel. All made of high tension steel with long time use
2.Loading System
Lifting system are chose as per customer requirement,including Barrel Lifting,Square Container Lifting,Skid Loader lifting system.
3.Sewage Container
The bottom of the tank is equipped with a sewage collection tank to prevent the sewage in the tank from leaking out, effectively preventing the occurrence of secondary pollution.
4.Rear Full Electronic Control
Electronic control Panel install in the back of the container body for easy handling. Imported PLC Control System with auto & semi-auto control. Optional Inside Cabin Control
5.Manual Handle Control
The hydraulic controller at the rear of the cab controls the work of the reversal mechanism and the pressure filling mechanism to ensure the accuracy and reliability of each mechanism and improve the reliability of the vehicle..
6.Lift hydraulic strut
7.Reverse hydraulic strut
IV.Flip form of Compactor Garbage Truck
Load operation is less than 30 seconds, unloading operation time is less than 45 seconds;
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turnover mechanism,can also choose ground hopper and
other kinds of loading mechanism.
Automatic control-- The hydraulic control operation system can be controlled by electric and manual, one operation system button installed
in the cab, the other operation system button installed at the back of the upper body.
IV. Production workshop
There are more than 500 workers in our factory. Every production details are strictly controlled by our technicial engineers and production manager.
V. PRODUCT SHIPPING (RORO OR BULK SHIP OR CONTAINER)
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
VI. COMPANY INFO
HUBEI FUYA VEHICLE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales
and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck ,
refrigerated truck, lpg and etc.
Welcome to contact with us for more info. We will offer you the best truck as we can .
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}